Content of Delivery
 ===================
 
 * cgToken V4 (Prototype)
 * JCOP 2.4.1 Smartcard with pre-installed cryptovision pkcs#15 applet
 * Windows 10 PC/SC Driver for cgToken
 * cryptovision act sc/interface 6.6.9 (pkcs#11, Windows CSP, Windows Smartcard Mini Driver, and Admin Tool)
 
 Installation:
 =============
 
 
 A) Bluetooth pairing
 --------------------
 1. Turn on the Bluetooth on your Windows 10 machine
 2. Turn on cgToken
 3. On cgToken press the right "ok" Button to enter pairing Mode
 4. On Windows 10 machine got to "Settings" -> "Bluetooth" and press pair on the cgToken bluetooth device
 5. Enter the 6 digit pairing pin displayed on cgToken
 6. cgToken will display a success message
 
 
 B) Driver installation
 ----------------------
 You need admin privileges to install the driver.
 
 1. Turn off Bluetooth on your Windows 10 machine
 2. Double click on the MSI installer file
 3. Step through the installation wizard
 4. Assure that the "start application" checkbox is set on the last page of wizard before closing the setup.
 5. Turn on again Bluetooth on your windows 10 machine
 
 
 C) cgToken pairing
 ------------------
 After successful pairing cgToken with windows and installation of the driver, it will do an additional pairing with an 32 digit code
 
 1. Turn on cgToken
 2. Wait until a Session input dialog apears on your monitor and cgToken displays two lines of digits
 3. Enter the digits displayed on cgTokens display correctly
 4. cgToken will display a success message
 
 
 Usage
 =====
 
 When cgToken is successfully paired there is a PC/SC reader registered in your windows 10 which can be accessed 
 like any other smart card reader.
 
 
 Card Events
 -----------
 Your middleware or smart card administration tool should recognize a inserted smart card whenever cgToken is 
 in range of your bluetooth network of your pc or laptop. 
 
 If you go out of range of your bluetooth network or turn off cgToken a card eject event is triggered.
 
 If cgToken does not have a smart card inside, no card events are triggered.
 
 
 Reader Events
 -------------
 Due to that, the smart card reader itself will never disapear from your windows 10.
 
 
 Smart card activity 
 -------------------
 There is no indication on the display of cgToken if the smart card is powered or active.
 
 The tray application on windows 10 side indicates if an application is using the cgToken via a green, blue and orange icon.
  * green:  smart card present, not used
  * blue:   smart card present, in use
  * orange: smart card not present