AirID
Quick Start Guide
Thank you for chossing our product AirID.
This guide explains all the basics of the certgate wireless smartcard reader AirID and gives you step-by-steps instructions to get you started using AirID. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.
Intended Use
AirID is a wireless smart card reader which you can carry with you anytime (around the work). The AirID reader communicates via a secure Bluetooth Low Energy (BLE) connection with your device and makes the inserted smart card available for cryptographical operations such as data encryption or authentication.
Support / Questions
For questions and support please use the email address [email protected]
Content of Delivery
- AirID smartcard reader
- USB cable
- transparent plastic strap for use with ID Badges
General Features
Your AirID is a wireless smart card reader for ID-1 smart cards which can be used via BLE (Bluetooth Low Energy) and USB.
Device Features
1 Low Power LCD Display
2 LED indicator
3 Jog dial control element
4 USB interface
5 Smart card internal slot
Control Element
AirID is designed for easy menu navigation using a 3-way version of jog dial control element.
up and down scrolling | navigation |
press | select |
Status Indicator
Following status indicators exists on AirID
Status | Status Indicator | Meaning |
---|---|---|
Smart card status | card inserted, card not supported | |
card insert and card supported | ||
card access blocked (coverage) | ||
Connection status | Bluetooth and advertising activated | |
Bluetooth activated and connected | ||
Battery status | remaining battery capacity | |
LED | red | battery low, please charge |
red and blue | battery charging | |
blue and green | battery completely charged |
Menu
Setting | Meaning |
---|---|
AirID - show the card status | |
Initialize | |
Card OK | |
card unreadable | |
Connection - used to activate and deactivate the Bluetooth connection | |
Initialize | |
ON/waiting | |
Bonding | |
Connected | |
Disconnecting | |
OFF | |
Pairing Code | |
Pairing Code | |
Pairing success | |
Pairing fail | |
Settings | |
Sig Strenght | |
Advertising | |
Display | |
Backlight | |
Contrast | |
Buzzer | |
Encryption | |
Reset Keys | |
Factory Reset | |
Coverage | |
Back | |
AirID Info | |
Serial Number | |
IEEE Address | |
Received | |
Battery | |
Time | |
Board | |
Bootloader | |
Firmware | |
Build | |
Back | |
Card Info | |
Prefer Device | |
USB Card Reader |
Quick Start
Charging
Ensure battery is completely charged. AirID is powered by a rechargeable Li-Po baterry. The baterry is charged by plugging the AirID into either a computer or external USB wall adapter using the USB cable provided.
Power On
Insert the smart card to power on the reader.
Initiate Pairing
Choose "Connection" to activate Bluetooth on AirID.
Pairing
AirID will be listed with its serial number on the BLE devices list. Press "Pair" and enter 6 digit pairing key shown on AirID display.
AirID need to be paired through an app on iOS and Android and through device settings on WIndows.
Pairing complete
After succesfully pairing "Pairing success" will be displayed on AirID
AirID is now connected with your device and the device name is displayed.