certgate is pleased to welcome you as a new user of certgate's USB Bluetooth Connector for AirID and ONEKEY ID, ONEKEY BRIDGE.

This guide explains all the basics of ONEKEY BRIDGE and gives you step-by-steps instructions to get you started using it. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.

Support / Questions

For questions and support please use the email address [email protected]

Content of Delivery

• ONEKEY BRIDGE, USB Bluetooth Connector for AirID and OKID

Hardware Features

With the ONEKEY BRIDGE, certgate‘s wireless smartcard readers* can also be used with devices that do not support Bluetooth low-energy by default, such as Bluetooth devices with Windows 7 or Linux thin clients. Connected directly to a USB port, it enables wireless communication - without driver installation. For example, also for macOS and other platforms.

Choose Your Platform

Section
Column width 30% Column width 30% Column width 30% Column width 30%

Windows 10

Anchor
Windows10 Windows10

In this section, you will find the steps to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector. ONEKEY BRIDGE enables the use of AirID and ONEKEY ID on devices without BLE.

Prerequisites

• Computer running Windows 10
• AirID Central App installed

Windows 7

Anchor
Windows7 Windows7

In this section, you will find the steps to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector. ONEKEY BRIDGE enables the use of AirID and ONEKEY ID on devices without BLE.

Prerequisites

• Computer running Windows 7
• AirID Central App installed
• winusbcompat.zip file or Only one Windows Setup required (t.b.d)