Versions Compared

Old Version 10

changes.mady.by.user Silvia Baumgartner

Saved on

compared with

New Version 11

changes.mady.by.user Silvia Baumgartner

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

certgate is pleased to welcome you as a new user of certgate's USB Bluetooth Connector for AirID and ONEKEY ID, ONEKEY BRIDGE.

This guide explains all the basics of ONEKEY BRIDGE and gives you step-by-steps instructions to get you started using it. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.

Support / Questions

For questions and support please use the email address [email protected]


Content of Delivery

  • ONEKEY BRIDGE, USB Bluetooth Connector for AirID and OKID


Hardware Features

ONEKEY BRIDGE is a USB Bluetooth connector for AirID. The purpose of the ONKEY ONEKEY BRIDGE is to help you use AirID with devices that do not support Bluetooth low-energy by default, or have an unstable BLE connection. Additionally, if you want to use your reader on multiple devices without pairing it first to each device, the ONEKEY BRIDGE is the best choice. Once the reader is paired with the ONEKEY BRIDGE, the reader can be used with any other device in that OKBRIDGE is plugged-in. Connected directly to a USB port, it enables wireless communication - without driver installation. Supported by any CCID-enabled systems like macOS, Linux and other platforms.

 


  • USB 2.0 Type A connector
  • Bluetooth version 4.2 supported
  • Stores up to 10 device pairing information
  • Miniature dimensions: 48 mm x 37,5 mm x 14 mm
  • Detection of OKBRIDGE as a standard CCID card reader
  • Supported operating systems: Windows 7, 8, 10, macOS (min 10.12) and Linux (plug&play requires libccid 1.4.28)


Choose Your Platform

Section


Column
width30%


Column
width30%


Column
width30%



Column
width30%




Note

ONEKEY BRIDGE supports AirID with firmware from version 1.3.0 upwards.


Windows 10
Anchor
Windows10
Windows10

In this section, you will find the steps to install the AirID Driver, AirID Central App and to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector. ONEKEY BRIDGE enables the use of AirID and ONEKEY ID on devices without BLE.

Prerequisites

  • Computer a computer running Windows 10 operating system

UI Steps
  • AirID Central App installed
    • ui-steps


    UI Step

    Driver Download

    Download the latest AirID Installer for Windows at AirID - Software, Driver & SDK


    UI Step

    Driver Installation

    Unzip and double click on the .msi file

    Folow the instructions in the installation wizard


    ui-stepui-stepui-stepui-step
    UI Step

    Bluetooth Pairing

    Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.

    UI Step

    Make sure, your smart card reader is ready to connect.

    • AirID: Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display:Image Modified
    • OKID:

    • Power on ONEKEY ID and press "OK" button for pairing mode. The OKID should display "Switch on the Bluetooth on your device and make pairing"

    Move the mouse to the AirID Central app App icon in the notification area. (or The AirID Tray icon is displayed on the bottom right side of your taskbar) Then click the mouse right button and choose OKBRIDGE

    Screenshot

    Bridge

    The searching for available smart card reader starts automatically. If not, click Search to list available smart card reader.

    Select the smart card reader (serial number) which you want to pair with the OKBRIDGE in the shown device list. Click Connect

    Screenshot

    . If the serial number of your AirID or OKID is not displayed, click Search, to start a new searching.

    Insert the paring code shown on your AirID or OKID and click Pair

    Now the smart card reader is apired with the ONEKEY BRIDGE and ready to use.




    Windows 7
    Anchor
    Windows7
    Windows7

    In this section, you will find the steps to install the ONEKEY BRIDGE Windows 7 driver and to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector. ONEKEY BRIDGE enables the use of AirID and ONEKEY ID on devices without BLE.

    Prerequisites

    • Computer a computer running Windows 7 OS
    • ONEKEY BRIDGE driver updated
      • AirID Central App installed
    • operating system

    UI Steps


    UI Step

    Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.

    Driver Download

    Download the latest AirID Installer for Windows at AirID - Software, Driver & SDK

    UI Step
    Download the latest driver (winusbcompat.zip file) for Windows 7 at ONEKEY BRIDGE - Driver and unzip the file.


    UI Step

    Open Windows Device Manager (open the Start Menu and search for "device manager")

    UI Step

    Double click on ONEKEY Bridge Ctl (oder CCID ???) in the Other devices branch.

    UI Step

    In the opened window "ONEKEY Bridge Properties" click on "Update Driver"

    UI Step

    Select "Browse my computer for driver software", click "Browse" to find the location of the downloaded driver file (from step 2) and click Next to install the driver

    UI Step

    Close the window "Driver update". The ONEKEY BRIDGE Driver has been installed.

    Driver Installation

    Unzip and double click on the .msi file

    Folow the instructions in the installation wizard

    On the page "Custom Setup", select "Win USB Compat" to be installed on your computer. This is the Windows 7 driver for the ONEKEY BRIDGE.


    ui-step
    UI Step

    Bluetooth Pairing

    Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.

    Make sure, your smart card reader is ready to connect.

    • AirID: Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display:Image Added
    • OKID: Power on ONEKEY ID and press "OK" button for pairing mode. The OKID should display "Switch on the Bluetooth on your device and make pairing"

    Move the mouse to the AirID Central app icon in the notification area. Then click the mouse right button and choose OKBRIDGE

    Screenshot

    UI Step

    Bridge

    The searching for available smart card reader starts automatically. If not, click Search to list available smart card reader.

    Select the smart card reader (serial number e.g. AirID 5640002105 or OKID102211Select the AirID (serial number) which you want to pair with the OKBRIDGE in the shown device list. Click Connect

    Screenshot

    . If the serial number of your AirID or OKID is not displayed, click Search, to start a new searching.

    Insert the paring code shown on your AirID or OKID and click Pair

    Now the smart card reader is paired with the ONEKEY BRIDGE and ready to use.