Anchor

	up
	up

UI Text Box

size	medium

Here you will find current and prior versions of AirID related drivers, SDKs and firmware.

UI Text Box

Driver & SDK

Choose your platform:

UI Text Box

Firmware

Choose your product:

AirID 2 Business

AirID 2 Government

AirID 2 Mini Business

AirID 2 Mini Government

AirID 1 Business

AirID 1 Government

AirID Bridge

Anchor
Driver&SDK
Driver&SDK
Driver & SDK

Anchor
Win1
Win1
Windows

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7)

200811

Release Notes

Main Changes

Beside the full installer containing Firmware, Driver and Central we finally provide the AirID Driver as a separate MSI installer and as a ZIP/INF based installer

General

added French localization to Installer
provide AirID Driver as a separate MSI installer
Provide AirID Driver as a separate ZIP/INF based installer

Driver: 1.0.0

Updated Driver to Version 1.0.0
Fixed forwarding settings to Central
Fixed some minor code issues

Central: 1.0.0.4

added french UI Translation
updated firmware update to 1.4.0 for AirID2, AirID2 Mini Business (BUS)
added firmware update to 1.4.0 for AirID2, AirID2 Mini Government
removed legacy code and resources

Note
In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-200811.exe

AirID-Installer-200811-fr.exe

AirID-Driver-1.0.0-x64.msi

AirID-Driver-1.0.0-x86.msi

AirID-Driver-1.0.0-x64.zip

AirID-Driver-1.0.0-x86.zip

AirID-Installer-200811.exe.sha2_256

AirID-Installer-200811-fr.exe.sha2_256

AirID-Driver-1.0.0-x64.msi.sha2_256

AirID-Driver-1.0.0-x86.msi.sha2_256

AirID-Driver-1.0.0-x64.zip.sha2_256

AirID-Driver-1.0.0-x86.zip.sha2_256

UI Expand

title	Prior versions

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7)

200415

Release Notes

General

signed with new certificate valid until 2022
removed OpenSC from installer

Driver: 0.9.11.6

signed with new certificate valid until 2022

Central: 1.0.0.2

added Tutorial for easy setup
updated firmware update to 1.3.1 for AirID2, AirID2 Mini business
added firmware update to 1.3.1 for AirID2, AirID2 Mini government
removed legacy code and resources
signed with new certificate valid until 2022

Note
In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-200415.exe

AirID-Installer-200415.exe.sha2_256

UI Expand

title	Prior versions

Checksum (SHA256)

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC

1.0.24.6

Installer contains:

Driver: 0.9.11.5

Fixed driver crashes

Central: 0.9.24

Fixed bug related to flash A2

includes FW updates:

AirID1 Business 1.2.4-GA
AirID1 Government 1.3.4-GA
AirID2 Business 1.2.1-GA
AirID2 Mini Business 1.2.1-GA

OpenSC v 0.20.0.6

Note
In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-191122.exe

AirID-Installer-191122.exe.sha2_256

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC

1.0.23.2

Installer contains:

AirID Driver 0.9.10

AirID Central v 0.9.23
improved:
- Removed "Backlight" setting for AirID 2 Mini
- Removed "Settings" and "Change PIN" from AirID Central menu (right click in Windows notification area)
includes FW updates:
- AirID1 Business 1.2.4-GA
- AirID1 Government 1.3.4-GA
- AirID2 Business 1.1.1-GA
- AirID2 Mini Business 1.1.1-GA

OpenSC v 0.20.0.6

Known issues:

Switching off and on BLE in the Windows settings might cause connection and driver issues

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-190917.exe

AirID-Installer-190917.exe.sha2_256

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC

1.0.22

UI design

Installer contains:

AirID Driver 0.9.10

AirID Central v 0.9.22
new:
- support AirID 2 Mini (identifier, graphic, settings, etc.)
  - added graphic for AirID 2
  - added graphic for AirID 1 with certgate Layout
  - show currelty used encryption standard (AES 256 / 128) instead of showing configured encryption standard (Force 256 bit > Yes / No)
improved:
- improved filter and sort AirID Bridge search results
  - removed built information for FW
fixed:
- signal strength setting with 4 bars for AirID 2 and AirID 2 Mini
includes FW updates:
- AirID 1 Business 1.2.4-GA
- AirID 1 Government 1.3.4-GA
- AirID 2 Business 1.0.3-GA

Known limitations:

The Windows device manager currently shows v0.9.0.0 instead of v0.9.10.
Switching off and on BLE in the Windows settings might cause connection and driver issues

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-190607.zip

AirID-Installer-190607.zip.sha2_256

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC

1.0.21

Contains:

Central 0.9.21
Driver 0.9.9
FW AID2-FW-1.0.3-GA

Fixed:

Scaling issue in Central
Issue with device descriptor regarding long FW names
Request during installation with Win 7

Improved:

Firmware distribution in Central for AirID1 BUS/GOV and AirID2 BUS

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-1.0.21.zip

AirID-Installer-1.0.21.zip.sha2_256

AirID Installer for Windows

AirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC

1.0.20.0

changed default: OpenSC will not be installed
changed default: Winusbcompat will be installed on Win7
removed: Auto-Lock Feature
updated: central 0.9.19 -> 0.9.20
- fixed: bug related to scaling

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-1.0.20.0.exe.zip

AirID-Installer-1.0.20.0.exe.zip.sha2_256

Anchor
macOS1
macOS1

macOS

Tip

title	APPLE MacOS INFORMATION PAGE AVAILABLE

Please check our Information page "AirID & Smart Card @ MacOS" to receive valuable information about MacOS & smart card integration!

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID BLE Software for MacOS

AirID BLE Software for MacOS to connect AirID & AirID Mini with MacOS systems via Bluetooth LE

1.1.0-GA

release contains

AirID BLE IFD Handler v1.1.0-GA
(Driver for AirID BLE connection)
AirIDMacCentral v1.1.0-GA
(UI program for selecting/changing AirID)

Full support for released versions of macOS Mojave 10.14.6 and macOS Catalina 10.15.3

Removed debug log for sc status (too much) in ifd-airid-ble driver
Added {public} to debug logging as Catalina 10.15.3 no longer allows to enable and display private data logging

Removed card-idle-timer Feature from ifd-airid-ble driver as it looks like Apple is integrating such a feature directly in CTK

ifd-airid-ble.pkg package is now signed with Developer ID Installer: certgate GmbH (HY99FHCP6A) certificate

AirIDCentral.pkg package is now signed with Developer ID Installer: certgate GmbH (HY99FHCP6A) certificate

AirIDCentral.pkg package is now notarized and stapled as well

AirIDMacCentral was renamed to AirIDCentral
- Please remove the OLD /Applications/AirIDMacCentral Application manually
- The Installer installs the new named AirIDCentral Application to /Applications.

AirID Central now presents a “Introduction Tutorial” when started for the first time.

Reworked the Help Menu Structure
- Show Introduction Tutorial
- Online Support Access for https://certgate.com/support
- About AirIDCentral

Main Installer package is now component based and allows selection of component packages

Main Installer package now checks if os-version >= 10.14 (Mojave and Catalina)

Main Installer package now checks if os arch type == x86_64

Known Issues

Enable logging of private Date is no longer working in Catalina, e.g. ‘sudo log config --mode "private_data:on"’
- Using the PrivateLogs workaround is no longer working starting with macOS 10.15.3-beta2 (beta1 still works)

macOS Mojave 10.14.6
macOS Catalina 10.15.3

Note

Only macOS Catalina 10.15.4 is supported.

macOS Catalina 10.15.1, 10.15.2, 10.15.3 and Betas are not supported

AirID-BLE-Software-for-MacOS-1.1.0.pkg

AirID-BLE-Software-for-MacOS-1.1.0.pkg.sha2_256

AirID CCID-USB Software for MacOS

AirID CCID-USB Software for MacOS to connect AirID & AIrID Mini with MacOS (Mojave only) via USB

1.4.31

Contains:

libccid 1.4.31 repackaged to include only certgate AirID based USB product VID/PID
Installer signed with certgate Apple Developer ID certificate
Installer Apple notarized

MacOS 10.13+ to 10.14.6 (Mojave)

Note
This package is not required on MacOS 10.15 (Catalina). MacOS 10.15 (Catalina) includes libccid 1.4.31 already.

ifd-airid-ccid-1.4.31.pkg

ifd-airid-ccid-1.4.31.pkg.sha2_256

UI Expand

title	Prior versions

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID BLE Software for MacOS

AirID BLE Software for MacOS to connect AirID & AirID Mini with MacOS systems via Bluetooth LE

1.0.0-GA

Initial release contains

AirID BLE IFD Handler v1.0.0-GA
(Driver for AirID BLE connection)
AirIDMacCentral v1.0.0-GA
(UI program for selecting/changing AirID)

MacOS Mojave 10.14.6

AirID-BLE-Software-for-MacOS-1.0.0.pkg

AirID-BLE-Software-for-MacOS-1.0.0.pkg.sha2_256

Anchor
iOS1
iOS1
iOS

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID SDK for iOS

1.0.4-GA

New or changed:

Analyzed and refactored code with regards to initial pairing and LTK / SK creation to make initial LTK key agreement more robust against LTK and SK negotiation failures with AirID1 devices.
Moved exchangeKey to AIDDeviceStateConnected
Added state counter to better track state changes and having better control for state transits
replaced calls to exchangeKey by state reenter
Use state counter for detecting init abort on problems or connectivity issues when Key agreement is in progress.
changed Timer Timeout for pairing (from selection to successful final initialization) from 30.0 seconds to 50.0 seconds
Changed encryption TAG length from 8 to 4 to comply with other platform drivers and make packet transmit more robust
Updated logging to use device name where appropriate

Fixed:

AirID reader becomes disconnected during initial connection with pairing (regression)
Fixed mis guided Timer Timeout which sometimes fires even when Timer was invalidated. This issue was partly responsible for firing "Initialization Timeout" Errors even when LTK and SK where successfully negotiated.
Use encrypted data length for packet calculation not the "unencrypted" data length.

>= iOS 10.3.3; Xcode 10+

AirID-iOS-Driver-v1.0.4-GA.zip

AirID-iOS-Driver-v1.0.4-GA.zip.sha2_256

UI Expand

title	Prior versions

Driver & SDK	Description	Version	Release Notes	Supported OS Platform	File	Checksum (SHA256)
AirID SDK for iOS	AirID SDK for iOS	1.0.0	Added compatibility with firmware 1.2.1 and 1.3.0 Improved protocol downgrade protection	>= iOS 10.3.3; Xcode 10+	AirID-iOS-SDK_1.0.0.zip	AirID-iOS-SDK_1.0.0.zip.sha2_256

Anchor
Android1
Android1
Android

Include Page

	_AirID Android - Device heterogeneity
	_AirID Android - Device heterogeneity

Driver & SDK	Description	Version	Release Notes	Supported OS Platform	File	Checksum (SHA256)
AirID SDK for Android	AirID SDK for Android	1.9.4-GA	Android Studio 3.6.3 was used to build the final GA Release Android 10 is now fully supported but we still targeting API version 28 The Driver now uses android.permission.ACCESS_FINE_LOCATION to support Android 10 in AndroidManifest.xml The Driver now uses android.permission.ACCESS_BACKGROUND_LOCATION to support Android 10 Better support for HW revision A2XX1.1.0 and firmware 1.3.1+. Added A2XX and A2MX serial number parsing to DeviceType enum. Fixed an issue with AirID1 key management and Android 10	Android 8 upwards (API 26); Android Studio 3.6.3	AirID-Android-Driver-v1.9.4.zip	AirID-Android-Driver-v1.9.4.zip.sha2_256

UI Expand

title	Prior versions

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID SDK for Android

1.9.3-GA

Updated Gradle version to v3.4.1
Activated NSLogger for debug version
Implementation of accessibility for AirID2 Mini readers
Defined new setting for LEDs for AirID2 Mini

Android 8 upwards (API 26); Android Studio 3.4.1

AirID-Android-Driver_v1.9.3-GA.zip

AirID-Android-Driver_v1.9.3-GA.zip.sha2_256

AirID SDK for Android

1.9.2-GA

Analyze code with regards to initial pairing and LTK/SK creation to make initial LTK key agreement more robust against LTK and SK negotiation failures with AirID1 devices.
Analyze and test code with regards to time intervals to eliminate AirID reader stuck on "not bonded yet".
Test and change the time intervals and delays on Bluetooth connection to make the connection more stable.
Set the key remotely from the app for saving LTKs is available. (Optional)

Android 8 upwards (API 26); Android Studio 3.4.1

AirID-Android-Driver-v1.9.2-GA.aar.zip

AirID-Android-Driver-v1.9.2-GA.aar.zip.sha2_256

AirID SDK for Android

1.8.6

Bugfixes

handling of AirID no random number
disconnect after card reset
loop after force AES-256 mode is enabled
AirID2 discovery and pairing

Android 4.4 upwards

AirIdDriverAndroid-1.8.6.aar.zip

AirIdDriverAndroid-1.8.6.aar.zip.sha2_256

Anchor
Linux1
Linux1
Linux

Info
As there are many distributions of Linux available, please contact our support at https://certgate.com/service-portal to get the suitable AirID driver for your Linux system.

Anchor
Firmware
Firmware
Firmware

Anchor
AirID2_Bus1
AirID2_Bus1
AirID 2 Business

Info
How do I update the AirID device firmware on Windows 10 and MacOS?

Description	Version	Release Notes	Classification	File	Checksum (SHA256)
AirID 2 Firmware Business Edition	1.4.0-GA	Fixed ensure that local changed settings are sent back to the host side. Don't switch to update mode @ BLE indication "0x0A System Suspend". Improve USB bootloader mode (HW version < 1.1.0) selection Switch off JTAG pins if JTAG is fused Improvements Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts. Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device. Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods. Set 2M PHY as preferred PHY (BLE5) Do all BLE related settings before advertising starts A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions New Functionality (API/SDK) new RPC method 0x16 to switch to bootloader mode from host side Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0) Removed Functionality migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported! Remove BLE indications to trigger update modes (0x04 and 0x0B) Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore. Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles	Recommended Update	airid-all-firmware-1.4.0.zip	airid-all-firmware-1.4.0.zip.sha2_256

UI Expand

title	Prior versions

Description

Version

Release Notes

Clasification

File

Checksum (SHA256)

AirID 2 Firmware Business Edition

1.3.2-GA

Fixed

Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes

Added

Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards
Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations
Added event logging capability for the last ~100 events to AirID2 firmware
- To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos:
  - Read last ble disconnect reason in debug menu
  - Information about connection parameters
  - New logging data struct for BLE stack events:
    - size ~100 last events
    - stop logging @ disconnect
    - read data from new RPC command
    - restart logging after read
- This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver

Recommended Update

airid-all-firmware-1.3.2.zip

airid-all-firmware-1.3.2.zip.sha2_256

AirID 2 Firmware Business Edition

1.3.1-GA

Improved:

added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS
added support for new bootloader signing keys

airid-all-firmware-1.3.1.zip

airid-all-firmware-1.3.1.zip.sha2_256

AirID 2 Firmware Business Edition

1.3.0-GA

Improved:

Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers)
Low battery warnings are displayed
contrast menu removed from settings

airid2-fw-1.3.0.zip

airid2-fw-1.3.0.zip.sha2_256

AirID 2 Firmware Business Edition

1.2.1-GA

Improved

NVM rework to make future firmware updates smooth
BLE stack updated to v 2.12.3
Distance sensor presettings adjusted: near -70dB, mid -75dB, far -80dB
If the device is in USB card reader mode, a new bluetooth connection will not make it leave the USB card reader mode
Card support: disabled Clock stop support which seems to cause trouble with TicTok cards
For AirID Mini: Linearization of battery level during charging and discharging

Note

Note for firmware updates

The device settings will be set to default for firmware updates from versions lower than v1.1.1. Please check your device settings after doing the firmware update

Note for firmware downgrades

If you want to downgrade to 1.1.1, first do a downgrade to 1.1.0, then upgrade to 1.1.1, otherwise NVM in 1.1.1 will not work even after factory reset. If re-updating, do a factory reset.

Note for users with version 1.2.0-rc1/rc2

For firmware updates from version 1.2.0-rc1/rc2, make sure the USB cable is not connected BEFORE the update process is started. In case the device is already connected via USB, replug the cable to enter the flashing mode.

airid2-fw-1.2.1.zip

airid2-fw-1.2.1.zip.sha2_256

AirID 2 Firmware Business Edition

1.1.1-GA

Fixed

Battery status icon updates with changed battery level
Staccato like switching connection off/on doesn't bother BLE handling
NVM initialization logic

Improved

Setting maximum and minimum advertising interval to 152.5 ms
Setting maximum and minimum fast connection intervals to 15 ms
Setting maximum and minimum slow connection intervals to 195/210 ms
Don't send duplicated smart card status
Keep existing configuration paramaters at firmware update; new ones will be added with their default values
LCD and backlight stay on at USB connection

Known limitations:

The firmware update might reset the configured settings
In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2-fw-1.1.1.zip

airid2-fw-1.1.1.zip.sha2_256

AirID 2 Firmware Business Edition

1.1.0-GA

New:

Implementation of settings --> "Remove pairing" to remove the pairing information and keys (prior name of this option: "Reset keys")
Implementation of settings --> "Reset keys" to delete the stored keys (LTK) only without removing the pairing (new option)
Removed "Card Info" item from menu
Forced LE Secure Connection method for BLE pairing and communication

Improved:

Turn on display and backlight permantly while the device is connected to a external power supply
Change default value for setting of USB Card Reader (CCID) to Off
Returning to prior menu item after USB Card Reader pop-up dialog closes instead of moving to main menu item "AirID" per default

Fixed:

issues concerning TPDU error handling
issues concerning the icon for distance sensor in case of exceeding BLE range
workaround for internal BLE stack issues by device reboot

Known limitations:

In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2-fw-1.1.0.zip

airid2-fw-1.1.0.zip.sha2_256

AirID 2 Firmware Business Edition

1.0.3-GA

Fixed:

Issues regarding T1 cards
Advertising issues
Smaller bugfixes

Improved:

Battery capacity display on device

airid2-fw-1.0.3.zip

airid2-fw-1.0.3.zip.sha2_256

AirID 2 Firmware Business Edition

1.0.2-GA

Fixed:

Smaller bugfixes

Improved:

Remove "Card Info" menu item
Set "Force 256bit" default value to yes

airid2-fw-1.0.2.zip

airid2-fw-1.0.2.zip.sha2_256

AirID 2 Firmware Business Edition

1.0.1-GA

Initial General Availability (GA) Version of the AirID2 Firmware Business Edition

airid2-fw-1.0.1.zip

airid2-fw-1.0.1.zip.sha2_256

Anchor
AirID2_Gov1
AirID2_Gov1
AirID 2 Government

Info
How do I update the AirID device firmware on Windows 10 and MacOS?

Description	Version	Release Notes	Classification	File	Checksum (SHA256)
AirID 2 Firmware Government Edition	1.4.0-GOV-GA	Fixed ensure that local changed settings are sent back to the host side. Don't switch to update mode @ BLE indication "0x0A System Suspend". Improve USB bootloader mode (HW version < 1.1.0) selection Switch off JTAG pins if JTAG is fused Improvements Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts. Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device. Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods. Set 2M PHY as preferred PHY (BLE5) Do all BLE related settings before advertising starts A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions New Functionality (API/SDK) new RPC method 0x16 to switch to bootloader mode from host side Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0) Removed Functionality migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported! Remove BLE indications to trigger update modes (0x04 and 0x0B) Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore. Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles	Recommended Update	airid-all-firmware-1.4.0.zip	airid-all-firmware-1.4.0.zip.sha2_256

UI Expand

title	Prior versions

Description	Version	Release Notes	Classification	File	Checksum (SHA256)
AirID 2 Firmware Government Edition	1.3.2-GA	Fixed Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes Added Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations Added event logging capability for the last ~100 events to AirID2 firmware To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos: Read last ble disconnect reason in debug menu Information about connection parameters New logging data struct for BLE stack events: size ~100 last events stop logging @ disconnect read data from new RPC command restart logging after read This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver	Recommended Update	airid-all-firmware-1.3.2.zip	airid-all-firmware-1.3.2.zip.sha2_256
AirID 2 Firmware Government Edition	1.3.1-GOV-GA	Improved: added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS added support for new bootloader signing keys		airid-all-firmware-1.3.1.zip	airid-all-firmware-1.3.1.zip.sha2_256
AirID 2 Firmware Government Edition	1.3.0-GOV-GA	Improved: Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers) Low battery warnings are displayed contrast menu removed from settings		airid2-fw-1.3.0-GOV.zip	airid2-fw-1.3.0-GOV.zip.sha2_256
AirID 2 Firmware Government Edition	1.1.1-GOV-GA	fixed Battery status icon updates with changed battery level Staccato like switching connection off/on doesn't bother BLE handling NVM initialization logic LCD and backlight stay on at USB connection improved Setting maximum and minimum advertising interval to 152.5 ms Setting maximum and minimum fast connection intervals to 15 ms Setting maximum and minimum slow connection intervals to 195/210 ms Don't send duplicated smart card status Keep existing configuration paramaters at firmware update; new ones will be added with their default values Known limitations: The firmware update might reset the configured settings In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader. For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.		airid2-fw-1.1.1-GOV.zip	airid2-fw-1.1.1-GOV.zip.sha2_256
AirID 2 Firmware Government Edition	1.1.0-GOV-GA	initial release of AirID 2 Government Edition Known limitations: In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader. For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.		airid2-fw-1.1.0-GOV.zip	airid2-fw-1.1.0-GOV.zip.sha2_256

Anchor
AirID2Mini_Bus1
AirID2Mini_Bus1
AirID 2 Mini Business

Info
How do I update the AirID device firmware on Windows 10 and MacOS?

Description	Version	Release Notes	Classification	File	Checksum (SHA256)
AirID 2 Mini Firmware Business Edition	1.4.0-GA	Fixed ensure that local changed settings are sent back to the host side. Don't switch to update mode @ BLE indication "0x0A System Suspend". Improve USB bootloader mode (HW version < 1.1.0) selection Switch off JTAG pins if JTAG is fused Improvements Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts. Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device. Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods. Set 2M PHY as preferred PHY (BLE5) Do all BLE related settings before advertising starts A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions New Functionality (API/SDK) new RPC method 0x16 to switch to bootloader mode from host side Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0) Removed Functionality migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported! Remove BLE indications to trigger update modes (0x04 and 0x0B) Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore. Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles	Recommended Update	airid-all-firmware-1.4.0.zip	airid-all-firmware-1.4.0.zip.sha2_256

UI Expand

title	Prior versions

Description

Version

Release Notes

Classification

File

Checksum (SHA256)

AirID 2 Mini Firmware Business Edition

1.3.2-GA

Fixed

Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes

Added

Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards
Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations
Added event logging capability for the last ~100 events to AirID2 firmware
- To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos:
  - Read last ble disconnect reason in debug menu
  - Information about connection parameters
  - New logging data struct for BLE stack events:
    - size ~100 last events
    - stop logging @ disconnect
    - read data from new RPC command
    - restart logging after read
- This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver

Recommended Update

airid-all-firmware-1.3.2.zip

airid-all-firmware-1.3.2.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.3.1-GA

Improved:

added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS
added support for new bootloader signing keys

airid-all-firmware-1.3.1.zip

airid-all-firmware-1.3.1.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.3.0-GA

Improved:

Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers)
Low battery warnings are displayed

airid2mini-fw-1.3.0.zip

airid2mini-fw-1.3.0.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.2.1-GA

Improved

NVM rework to make future firmware updates smooth
BLE stack updated to v 2.12.3
Distance sensor presettings adjusted: near -70dB, mid -75dB, far -80dB
If the device is in USB card reader mode, a new bluetooth connection will not make it leave the USB card reader mode
Card support: disabled Clock stop support which seems to cause trouble with TicTok cards
For AirID Mini: Linearization of battery level during charging and discharging

Note

Note for firmware updates

The device settings will be set to default for firmware updates from versions lower than v1.1.1. Please check your device settings after doing the firmware update

Note for firmware downgrades

If you want to downgrade to 1.1.1, first do a downgrade to 1.1.0, then upgrade to 1.1.1, otherwise NVM in 1.1.1 will not work even after factory reset. If re-updating, do a factory reset.

Note for users with version 1.2.0-rc1/rc2

For firmware updates from version 1.2.0-rc1/rc2, make sure the USB cable is not connected BEFORE the update process is started. In case the device is already connected via USB, replug the cable to enter the flashing mode.

airid2mini-fw-1.2.1.zip

airid2mini-fw-1.2.1.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.1.1-GA

Fixed

Battery status icon updates with changed battery level
Staccato like switching connection off/on doesn't bother BLE handling
NVM initialization logic
Green LED switches off when Smartcard has bee switched off
Battery warning appears at 10% battery charge and below
Send correct Product Name USB descriptor
Send correct Model Number String in GATT characteristics

Improved

Setting maximum and minimum advertising interval to 152.5 ms
Setting maximum and minimum fast connection intervals to 15 ms
Setting maximum and minimum slow connection intervals to 195/210 ms
Don't send duplicated smart card status
Keep existing configuration paramaters at firmware update; new ones will be added with their default values

Known limitations:

The firmware update might reset the configured settings
In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2mini-fw-1.1.1.zip

airid2mini-fw-1.1.1.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.1.0-GA

initial release of AirID 2 Mini Business Edition

Known limitations:

In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2mini-fw-1.1.0.zip

airid2mini-fw-1.1.0.zip.sha2_256

Anchor
AirID2Mini_Gov1
AirID2Mini_Gov1
AirID 2 Mini Government

Info
How do I update the AirID device firmware on Windows 10 and MacOS?

Description	Version	Release Notes	Classification	File	Checksum (SHA256)
AirID 2 Mini Firmware Government Edition	1.4.0-GOV-GA	Fixed ensure that local changed settings are sent back to the host side. Don't switch to update mode @ BLE indication "0x0A System Suspend". Improve USB bootloader mode (HW version < 1.1.0) selection Switch off JTAG pins if JTAG is fused Improvements Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts. Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device. Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods. Set 2M PHY as preferred PHY (BLE5) Do all BLE related settings before advertising starts A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions New Functionality (API/SDK) new RPC method 0x16 to switch to bootloader mode from host side Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0) Removed Functionality migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported! Remove BLE indications to trigger update modes (0x04 and 0x0B) Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore. Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles	Recommended Update	airid-all-firmware-1.4.0.zip	airid-all-firmware-1.4.0.zip.sha2_256

UI Expand

title	Prior versions

Description	Version	Release Notes	Classification	File	Checksum (SHA256)
AirID 2 Mini Firmware Business Edition	1.3.2-GA	Fixed Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes Added Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations Added event logging capability for the last ~100 events to AirID2 firmware To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos: Read last ble disconnect reason in debug menu Information about connection parameters New logging data struct for BLE stack events: size ~100 last events stop logging @ disconnect read data from new RPC command restart logging after read This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver	Recommended Update	airid-all-firmware-1.3.2.zip	airid-all-firmware-1.3.2.zip.sha2_256
AirID 2 Mini Firmware Government Edition	1.3.1-GOV-GA	Improved: added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS added support for new bootloader signing keys		airid-all-firmware-1.3.1.zip	airid-all-firmware-1.3.1.zip.sha2_256
AirID 2 Mini Firmware Government Edition	1.3.0-GOV-GA	Improved: Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers) Low battery warnings are displayed		airid2mini-fw-1.3.0-GOV.zip	airid2mini-fw-1.3.0-GOV.zip.sha2_256
AirID 2 Mini Firmware Government Edition	1.1.1-GOV-GA	fixed Battery status icon updates with changed battery level Staccato like switching connection off/on doesn't bother BLE handling NVM initialization logic Green LED switches off when Smartcard has bee switched off Battery warning appears at 10% battery charge and below Send correct Product Name USB descriptor Send correct Model Number String in GATT characteristics improved Setting maximum and minimum advertising interval to 152.5 ms Setting maximum and minimum fast connection intervals to 15 ms Setting maximum and minimum slow connection intervals to 195/210 ms Don't send duplicated smart card status Keep existing configuration paramaters at firmware update; new ones will be added with their default values Known limitations: The firmware update might reset the configured settings In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader. For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.		airid2mini-fw-1.1.1-GOV.zip	airid2mini-fw-1.1.1-GOV.zip.sha2_256
AirID 2 Mini Firmware Government Edition	1.1.0-GOV-GA	initial release of AirID 2 Mini Government Edition Known limitations: In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader. For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.		airid2mini-fw-1.1.0-GOV.zip	airid2mini-fw-1.1.0-GOV.zip.sha2_256

Anchor
AirID1_Bus1
AirID1_Bus1
AirID 1 Business

Info
How do I update the AirID device firmware on Windows 10 and MacOS?

Description

Version

Release Notes

File

Checksum (SHA256)

AirID 1 Firmware Business Edition

1.2.4

New or changed:

Changed connection factory default to "ON/waiting" after Settings > Factory Reset
No splash screen after device reboot

Fixed issues:

Display charging status correctly if USB Card Reader mode is disabled
Display correct device name after Settings >reset keys
AirID freezing after initial pairing / connection with Android fixed by watchdog enabling
Android stability improvements:
- Stability improvements if connection interval is set too low, e.g. 7.5ms
- No connection interval update on idle

AirID_FW_CC2540_v1.2.4.zip

AirID_FW_CC2540_v1.2.4.zip.sha2_256

UI Expand

title	Prior versions

Description

Version

Release Notes

File

Checksum (SHA256)

AirID 1 Firmware Business Edition

1.2.2

Performance related changes:

Adjustment of low battery limit to avoid problems due to low battery
Fix initial card state in USB reader mode on windows 7
More error checks in case of connection loss
Connection interval handling improvements
Default signal strength to maximum
Tip
Please set signal strength to "maximum" to ensure best wireless AirID connection

AirID_FW_CC2540_v1.2.2.zip

AirID_FW_CC2540_v1.2.2.zip.sha2_256

AirID 1 Firmware Business Edition

1.2.1

Security related changes:

Improved protection for replay attacks

Improvement of encryption algorithm: using CCM instead of ECB
Improvement of Session Key management

Improved protocol downgrade protection

Implementation of „Force 256bit mode“ so that AirID cannot be forced down to communicate with AES 128bit encryption. Force 256bit mode is enabled per default

Performance related changes:

Reduction of power consumption

Power down the smart card on out-of-coverage
Have a higher connection interval when there is no BLE traffic for some time

Correct rates in USB CCID descriptor
Improved Android compatibility (discovering of our GATT service)

Usability related changes:

Smart card icon on AirID display blinks when the card is powered on
New setting menu item „USB card reader mode“ so that the USB cardreader mode can be enabled by default when USB is connected

AirID_FW_CC2540_v1.2.1.zip

AirID_FW_CC2540_v1.2.1.zip.sha2_256

AirID 1 Firmware

1.2.0

Set official vendor/product id for usb;
Removed highest signal strength level;
Fixed not showing name of the connected device when the card is out;
Fixed not clearing mobile device name on connection timeout;
Write default device name "Unknown Nr." after pairing and show it if device name not set;
Changed coverage adjusting text: first 10 seconds show RSSI value then 5 seconds show "Press to confirm" message and then again show RSSI value;
Extended coverage with presetting values: near, mid, far;
Fixed still showing coverage menu if device disconnected (now jumps to the start menu);
Added "back" buttons in the coverage menu.

AirID_FW_CC2540_v1.2.0.zip

AirID_FW_CC2540_v1.2.0.zip.sha2_256

Anchor
AirID1_Gov1
AirID1_Gov1
AirID 1 Government

Info
How do I update the AirID device firmware on Windows 10 and MacOS?

Description

Version

Release Notes

File

Checksum (SHA256)

AirID1 Firmware Government Edition

1.3.4-GOV

New or changed:

Changed connection factory default to "ON/waiting" after Settings > Factory Reset
No splash screen after device reboot

Fixed issues:

Display charging status correctly if USB Card Reader mode is disabled
Display correct device name after Settings >reset keys
AirID freezing after initial pairing / connection with Android fixed by watchdog enabling
Android stability improvements:
- Stability improvements if connection interval is set too low, e.g. 7.5ms
- No connection interval update on idle

AirID_FW_CC2540_v1.3.4-GOV.zip

AirID_FW_CC2540_v1.3.4-GOV.zip.sha2_256

UI Expand

title	Prior versions

Description

Version

Release Notes

File

Checksum (SHA256)

AirID1 Firmware Government Edition

1.3.1-GOV

Performance related changes:

Adjustment of low battery limit to avoid problems due to low battery
Fix initial card state in USB reader mode on windows 7
More error checks in case of connection loss
Connection interval handling improvements
Default signal strength to maximum
Tip
Please set signal strength to "maximum" to ensure best wireless AirID connection

AirID_FW_CC2540_v1.3.1-GOV.zip

AirID_FW_CC2540_v1.3.1-GOV.zip.sha2_256

Anchor
AirID_Bridge_1
AirID_Bridge_1
AirID Bridge

Info
How do I update the AirID BRIDGE firmware on Windows 10, Windows 7 and MacOS?

Description

Version

Release Notes

File

Checksum (SHA256)

AirID Bridge Firmware

1.0.2

fixed:

sleep related problems

onekey-bridge-1.0.2-prodkey.zip

onekey-bridge-1.0.2-prodkey.zip.sha2_256

UI Expand

title	Prior versions

Description	Version	Release Notes	File	Checksum (SHA256)
AirID Bridge Firmware	1.0.1	fixed: CCM tag check problems getting ExtProp descriptor	onekey-bridge-1.0.1-prodkey.zip	onekey-bridge-1.0.1-prodkey.zip.sha2_256
AirID Bridge Firmware	1.0.0	USB command GetDeviceName (0x13) returns only 1 NULL termination minor bug fixes	onekey-bridge-1.0.0-prodkey.zip	onekey-bridge-1.0.0-prodkey.zip.sha2_256

...

Space shortcuts

Page tree

Page History

Versions Compared

Old Version 90

New Version 91

Key

Driver & SDK

Choose your platform:

Firmware

Choose your product:

AnchorDriver&SDKDriver&SDK Driver & SDK

AnchorWin1Win1 Windows

AnchormacOS1macOS1

macOS

Known Issues

AnchoriOS1iOS1 iOS

AnchorAndroid1Android1 Android

AnchorLinux1Linux1 Linux

AnchorFirmwareFirmwareFirmware

AnchorAirID2_Bus1AirID2_Bus1AirID 2 Business

Fixed

Improvements

New Functionality (API/SDK)

Removed Functionality

AnchorAirID2_Gov1AirID2_Gov1AirID 2 Government

Fixed

Improvements

New Functionality (API/SDK)

Removed Functionality

AnchorAirID2Mini_Bus1AirID2Mini_Bus1AirID 2 Mini Business

Fixed

Improvements

New Functionality (API/SDK)

Removed Functionality

AnchorAirID2Mini_Gov1AirID2Mini_Gov1AirID 2 Mini Government

Fixed

Improvements

New Functionality (API/SDK)

Removed Functionality

AnchorAirID1_Bus1AirID1_Bus1AirID 1 Business

AnchorAirID1_Gov1AirID1_Gov1AirID 1 Government

AnchorAirID_Bridge_1AirID_Bridge_1AirID Bridge

Anchor
Driver&SDK
Driver&SDK
Driver & SDK

Anchor
Win1
Win1
Windows

Anchor
macOS1
macOS1

Anchor
iOS1
iOS1
iOS

Anchor
Android1
Android1
Android

Anchor
Linux1
Linux1
Linux

Anchor
Firmware
Firmware
Firmware

Anchor
AirID2_Bus1
AirID2_Bus1
AirID 2 Business

Anchor
AirID2_Gov1
AirID2_Gov1
AirID 2 Government

Anchor
AirID2Mini_Bus1
AirID2Mini_Bus1
AirID 2 Mini Business

Anchor
AirID2Mini_Gov1
AirID2Mini_Gov1
AirID 2 Mini Government

Anchor
AirID1_Bus1
AirID1_Bus1
AirID 1 Business

Anchor
AirID1_Gov1
AirID1_Gov1
AirID 1 Government

Anchor
AirID_Bridge_1
AirID_Bridge_1
AirID Bridge