...
Page properties | ||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Document Information
|
Content
Table of Contents |
---|
Thank you for purchasing the AirID Smart Card Reader. Befor using the AirID, please take the time to read this manual, to learn about all the features and capabilities of your new AirID.
Package Content
AirID smart card reader
USB cable
transparent plastic strap for using as ID badges
Bumper (landscape and portrait variant) (only with AirID Version 2)
Intended Use
AirID is a wireless smart card reader that you can carry with you at all times. The AirID reader communicates via a secure Bluetooth Low Energy (BLE) connection with your device and makes the inserted smart card available for cryptographical operations such as data encryption or authentication.
Support / Questions
Information about AirID can be found online at https://airid.com/en/ and on our service and support page AirID Support.
AirID GmbH
Germany
Tel.: +49 (0) 911 93523 0
Email: [email protected]
Website: https://airid.com/en/
AirID GmbH 2019, alle Rechte vorbehalten
Numbered Headings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
About This GuideThis guide provides step-by-step instructions to help customers using the AirID on Windows and iOS and contains also all the necessary information for application developers needed to use AirID's AirID Bluetooth reader with their apps. Who Should Read This GuideThe guide is intended for users of the AirID on Windows and for app developers who want to integrate AirID in their smart card aware environment or software. Typographical ConventionsThe following kinds of text formatting and icons identify special information in the document:
Device LayoutOverviewDevice Description AirID is a wireless smart card reader that you can carry with you at all times. The AirID reader communicates via a secure Bluetooth Low Energy (BLE) connection with your device and makes the inserted smart card available for cryptographical operations such as data encryption or authentication. AirID is powered by a rechargeable Li-Po battery. The battery is charged by plugging the AirID into either a computer or external USB wall adapter using the USB cable provided. The LCD display shows all setting information and status of the reader. The user-friendly jog-dial control element helps you to navigate through the settings of the device. Bluetooth Connected Mode Usage With the AirID it is possible to protect Apps with smart card based-security via Bluetooth Low Energy (BLE). Note: Because of the sandbox architecture of iOS and Android, the AirID driver needs to be integrated into an app to use AirID with this specific app. Examples of apps with AirID integration:
*contact your company administrator! If you would like to integrate AirID into your app, contact our support at [email protected] and get our AirID SDK for iOS. USB Connected Mode Usage AirID can be used as a standard USB CCID reader on all most all PCs with an common operanting system (Windows, OS X and Linux). Package ContentsCheck the product box for the following items:
Before start-up,ensure that the two safety seals are undamaged. If the safety seals are damaged, it is suspected that your device has been altered inadmissibly. In this case, please contact your distributor and do not use the device. Hardware FeaturesDevice Features
Menu LayoutIn the AirID device menu you can make various settings. You can access the different setting menus by navigating with the jog dial. AirIDThe AirID menu is displayed in the main window and shows the smart card status.
ConnectionThe Connection menu is the second setting when you scroll down. This is used to activate the Bluetooth connection or to terminate the connection.
Pairing CodeThis item is only shown during the first connection setup with a device and is used to display the pairing code and connection status.
SettingsUnder the menu Settings, you can configure settings for your AirID . Use the jog dial to select and confirm the settings.
AirID InfoUnder AirID Info you will find further information about the AIrID.
Card Info
Prefered DeviceUnder "Prefer Device" the pairing information of the AirID with the already connected devices are stored. From these information you can select to which device the AirID should preferably be connected in the future. All other devices will be ignored.
Firmware UpdateAirID is constantly working to make AirID even more reliable and faster. Therefore we provide firmware updates for our wireless smartcard readers under AirID Software, Driver & SDK from time to time. Please install a firmware update as soon as it is available as it improves the reliability of the reader. The AirID firmware can be updated via USB on Windows or MacOS Pcs. Download the latest firmware from our website and unzip the file. Below you will find the necessary steps for the update. Update AirID 2
The AirID restarts and has been updatet. You can use it with your smart card. Update AirID 1
The AirID has been updatet and you can use it with your smart card.
Using AirIDAirID supports various operating systems like Windows, MacOS, Linux, iOS and Android. The basic requirement is the Bluetooth Low Energy functionality of the device. When AirID is successfully paired and the driver is installed, the inserted smart card is available to be used for cryptographical operations such as authentication or data encryption. This requires an applet on the smart card and the corresponding middleware for the operating system used. The AirID software consists of two components:
AirID can be used with different terminals and platforms, but not in parallel operation. WindowsThe use of AirID under Windows is only possible as of Windows 8.1 due to the Bluetooth Low Energy functionality required. For use under Windows 7, an ONEKEY BRIDGE is additionally required. Installation and Pairing
The AirID can now be used.
Silent Installation of the DriverSilent installation is used for installation of the AirID driver without user interaction, usually from a batch file or other script. To perform a silent install using the ZIP format driver, extract the ZIP file, then run the AirID Installer .EXE program for the driver with the following comand line switch:
Any problem can be found in the log file. The command to uninstall the software package is as follows:
The optional parameter are:
Deleting the ConnectionThe pairing information are stored on both the Windows system and AirID. To terminate the connection completely, the information on both sides must be deleted. On Windows
On AirID Delete All Pairing Information To delete all stored pairing information from AirID a "Reset Keys" can be performed in the Settings menu. Delete Specific Pairing Information To delete specific pairing information from AirID a "Reset Keys" of the Windows workstation can be performed in the Settings menu. The pairing information can also be deleted via AirID Central App. To do this, go to the paired devices view, select the corresponding device from the list and click Delete. AirID Central App on WindowsAirID Central provides information and setting options for your AirID once your AirID is connected to your Windows device. If there is no connection, "No device" is displayed in the AirID Central. AirID Central as an AirID management software, provides an overview of:
The following information is displayed when clicking on the AirID device displayed in the AirID Central App:
A right click on the AirID Central icon in the Windows notification area opens a menu with the following application functions:
iOSUnder iOS system-wide support of smart cards and card readers is not possible. Therefore, the AirID driver needs to be integrated into an app to use AirID with this specific app. These apps usually interact with the available AirID Central App via extension or keychain.
Pairing
Deleting the ConnectionThe pairing information are stored on both the iOS device and AirID. To terminate the connection completely, the information on both sides must be deleted. On iOS
On AirID Delete All Pairing Information To delete all stored pairing information from AirID a "Reset Keys" can be performed in the Settings menu. Delete Specific Pairing Information Specific pairing information can be deleted via AirID Central App. To do this, go to the paired devices view, select the corresponding device from the list and click Delete. On AirID Version 2, the pairing information with a specific device can also be deleted by selecting "Reset Keys" → "Device Name" from the setting menu. AndroidUnder Android system-wide support of smart cards and card readers is not possible. Therefore, the AirID driver needs to be integrated into an app to use AirID with this specific app. These apps usually interact with the available AirID Central App via extension or keychain.
The connection to the the Android device is only active when the app in foreground is open. As soon as the app goes into the background, the Bluetooth connection to the AirID is released again. Pairing
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Numbered Headings | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
About This GuideThis guide provides step-by-step instructions to help customer using the AirID ID on Windows and iOS and contains also all the necessary information for application developers needed to use certgate's AirID Bluetooth reader with their apps. Who Should Read This GuideThe guide is intended for users of the AirID on Windows and for app developers who want to integrate AirID in their smart card aware environment or software. Typographical ConventionsThe following kinds of text formatting and icons identify special information in the document:
If you do not find the information you need in this document, or if you find errors, contact the certgate support-team at [email protected] Device LayoutOverviewDevice Description AirID is a wireless smart card reader that you can carry with you at all times. The AirID reader communicates via a secure Bluetooth Low Energy (BLE) connection with your device and makes the inserted smart card available for cryptographical operations such as data encryption or authentication. AirID is powered by a rechargeable Li-Po battery. The battery is charged by plugging the AirID into either a computer or external USB wall adapter using the USB cable provided. The LCD display shows all setting information and status of the reader. The user-friendly jog-dial control element helps you to navigate through the settings of the device. Bluetooth Connected Mode Usage With the AirID is it possible to protect Apps with smart card based-security via Bluetooth Low Energy (BLE). Note: Because of the sandbox architecture of iOS and Android, the AirID driver needs to be integrated into an app to use AirID with this specific app. Examples of apps with AirID integration:
*contact your company administrator! If you would like to integrate AirID into your app, contact our support at [email protected] and get our AirID SDK for iOS. USB Connected Mode Usage AirID can be used as a standard USB CCID reader on all most all PCs with an common operanting system (Windows, OS X and Linux). Package ContentsCheck the product box for the following items:
Before start-up,ensure that the two safety seals are undameged. If the safety seals are damaged, it is suspected that your device has been altered inadmissibly. In this case, please contact your distributor and do not use the device. Hardware FeaturesDevice Features Section | Column | | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Column | ||
---|---|---|
| ||
1 Low Power LCD Display 2 LED indicator 3 Jog dial control element 4 USB interface 5 Smart card internal slot |
Column | ||
---|---|---|
| ||
width | 50% |
---|
6 Double Header
Insert and remove a smart card
Insert the card chip first. The double header of the AirID reader can read the chip regardless of which side the chip is on.
To remove the card, simply slide it with the finger through the cut-out.
width | 25% |
---|
Control Element
AirID is designed for easy menu navigation using a 3-way version of jog dial control element.
Action
Function
up and down scrolling
navigation
press
select
Status Indicator
Following status indicators exists on AirID
Status
Status Indicator
Meaning
Smart card status
card inserted, card not supported or damaged
card inserted and card supported
card access blocked (coverage)
Connection status
Bluetooth and advertising activated
Bluetooth activated and connected
Battery status
remaining battery capacity
LED Indicator
AirID 2
Color
Meaning
AirID 1
Color
Meaning
Column | ||
---|---|---|
| ||
Technical Specification
This chapter provides the specification for the AirID 2 model.
Item
AirID2
First Release
September 2018
Certification
RoHS, CE, FCC
Enclosure
Shape
rectangular plus Bumper
Dimension
90 x 60 x 9 mm (plus Bumper)
Bumper
utilizable
Weight
?
Orientation of hanger
4 (with bumper)
Human interface
Display type
LCD, 132x32
Display size
ca. 9 x 30 mm
Control element
Jog Dial (up/down/enter)
USB port
USB-2.0-Micro-B
LED visible
2 (red: on while charging, blue: on while smart card powered on)
Acoustic feedback
Buzzer (KSSG33J12)
Bluetooth
Bluetooth Version
4.2
BLE chip
BGM13P, SiLabs
Battery
Battery type
NEXcell NEX422339PA
Battery size and weight
4.5 x 24.0 x 41.5 mm, 8g
Capacity
340mAh
Battery charging
via USB
Smart card interface
smart card size
ID1, contact interface (ISO7816)
smart card type
3V
Smart chip protocol
T=0, T=1
Smart chip header number
2
Smart chip header type
8 pins (MCD-7A6SC01-R), 6 pins (2286237-1,TE Connectivity) ;5 pins connected
Using chip-backsided printed cards
x
Using chip-sided printed cards
x
NFC funcion of card usable
x
Update
Firmware update
via USB
Bootloader update
via contact points on PCB
Menu Layout
In the AirID device menu you can make various settings. You can access the different setting menus by navigating with the jog dial.
AirID
The AirID menu is diplayed in the main window and shows the smart card status.
Initialize
AirID initialized the smart card. This message appears only very shortly ( WANN?)
Card OK
The smart card is inserted and it is recognized.
When AirID is paired with a device, the device name is displayed here.
Card unreadable
The inserted smart card is not readable. Please ensure that the card is properly inserted and the smart card is supported
Connection
The Connection menu is the second setting when you scroll down. This is used to activate the Bluetooth connection or to terminate the connection.
Initialize
AirID initializes Bluetooth and activates the advertising mode. This message appears only very shortly.
ON/ waiting
AirID has activated Bluetooth and the advertising mode and is waiting for the connection to be established. When the jog dial is pressed, Bluetooth and the advertising mode are disabled.
Bonding
AirID has successfully connected to a device. This message appears only very shortly.
Connected
AirID is connected to a device
Disconnecting
When the jog dial is pressed, the connection is terminated.
OFF
Bluetooth and the advertising mode are disabled. Pressing the jog dial activates Bluetooth and the advertising mode.
Info |
---|
In the advertising mode, the AirID sends a Bluetooth signal making it detectable by devices. Requests must be checked and confirmed. |
Pairing Code
This menu is only shown the first time a connection is established with a device and is used to display the connection key.
Pairing success
Connection successful
Connection failed. The following errors may occur:
Pairing fail 1: Pairing canceled
Pairing fail 4: Pairing code wrong
Pairing fail 23: Time out
Info |
---|
Pairing defines the successful Bluetooth connection between a device and the AirID. Since the pairing information is retained, the same devices may only be paired once. The device will ask you to enter (Windows 7, 8.1) or compare (Windows 10, iOS, Android) the pairing code displayed on the AirID. |
Settings
Under the menu Settings, you can configure settings for your AirID . Use the jog dial to select and confirm the settings.
Sig Strenght
Following settings are possible:
low (~3-5m, EcoModus, 1 bar)
middle (~5-7 m, 2 bars)
high (~7,5-10 m, 3 bars)
Advertising
Use the jog dial to set the advertising mode (Connection via Bluetooth) to permanent or EcoModeNote |
---|
If during the active advertising mode (EcoMode) no connection to a device is established, the advertising mode switches off automatically to save battery power. Therefore, a manual reconnection is necessary afterwards. |
Note |
---|
To save energy, a work schedule can be created via AirID Central APP. If the working hours are exceeded, the advertising mode remains deactivated. |
Display
permanent or eco mode so that the display switches off after a certain period of time.
Backlight
Select whether the backlight is activated or deactivated.
Contrast
Increase display contrast (adjustable in 4 levels) , .
Buzzer
Activate or deactivate the acoustic feedback of the AirID.
Force 256bit
Select if you want to encrypt the connection between AirID and the work device with AES-256.
USB Card Reader
If the AirID is connected via USB to the work device, you can select whether the AirID should be used as a USB card reader or not (NEUE BILDER sind notwendig) . If the AirID is not used as USB reader, the AirID is supplied with power via USB and thus charged.
Reset Keys
This setting deletes all pairing keys. This is recommended if you pass on AirID to others. After a reset, a new key exchange is necessary to re-established a connection.Factory Reset
This setting reset the AirID to factory settings. All pairing keys are also deleted.
Update Firmware
The AirID firmware can be updated with this setting.
Coverage (not ready)
The AirID reader can log you out and locks WINDOWS or mobile (iOS or Android) apps automatically, if a (preset) distance between your computer and your AirID has been exceeded. The "Distance Log-Out" is managed in AirID settings using "Coverage".This setting is optional and can only be configured if there is an active Bluetooth connection to the a device.
You can use pressetings or set the distance manually.
Following pressetings are available:
Near (~65 dB)
Mid (~75 dB)
Far (~80 dB)
Back
Select Back to return to the main menu.
AirID Info
Under AirID Info you will find further information about the AIrID.
Serial number of the AirID
Bluetooth address of the AirID
The received signal strength
Battery percentage indicator
Current time and day
Version of the AirID board
Version of the AIrID bootloader
Version of the AirID firmware version
Select Back to return to the main menu
Card Info
Displays information about the inserted smart card. These information is only displayed if the smart card is correctly inserted and recognized/ supported.
Prefered Device
Under "Prefer Device" the pairing information of the AirID with the before connected devices are stored. From these information you can select to which device the AirID should preferably be connected in the future. All other devices will be ignored.
Select the option New to connect AirID to a new device if the already connected devices are nearby. All other devices connected to AirID will be ignored.
Info |
---|
The pairing information with up to 10 different devices can be stored at the same time. |
Using AirID
AirID supports various operating systems like Windows, MacOS, Linux, iOS and Android. The basic requirement is the Bluetooth Low Energy functionality of the device. When AirID is successfully paired and the driver is installed, the inserted smart card is available to be used for cryptographical operations such as authentication or data encryption. This requires an applet on the smar card and the corresponding middleware for the operating system used.
The AirID software consists of two components:
- AirID Central App - a management software for your AirID forming the basis for usage of the device. The tool provides you with information and setting options for your AirID when your reader is connected to your device.
- AirID drivers, which ensures the communication between the AirID and the operating system, must be installed additionally depending on the platform or is already integrated in the Apps and solutions of third party vendors.
AirID can be used with different terminals and platforms is possible, but not in parallel operation.
Windows
The use of AirID under Windows is only possible as of Windows 8.1 due to the Bluetooth Low Energy functionality required. For use under Windows 7, an ONEKEY BRIDGE is additionally required.
Installation and Pairing
- Download the latest installer (zipped .msi file) for Windows at AirID - Software, Driver & SDK.
- Unzip and double click on the .msi installer file.
- Follow the instructions in the installation wizard.
- The AirID Windows driver and the AirID Central App are now installed.
- Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display:
- Open Windows "Settings→ Devices→ Bluetooth". Your AirID should be listed with its serial number. Press "Pair"
- Enter 6 digit pairing key shown on AirID display
- After successful pairing "Pairing successful" will be displayed on AirID
- After successful connection establishment, the AirID should display the name of your device
- Make sure that Bluetooth is activated on your Android device (Settings > Bluetooth > On)
- Open the AirID Central App
- Select the AirID (serial number) in the shown device list
- Compare the 6 digit pairing code shown on AirID display and confirm it to connect
- After a successful pairing, the AirID shows:
Note |
---|
If you already paired AirID with another device that are switched on and close to you, please navigate to "Prefer Device" in the AirID menu press the jog-dial and choose "New". Then press the jog-dial again to confirm. |
Deleting the Connection
The pairing information are stored on both the Windows system Android device and AirID. To terminate the connection completely, the information on both sides must be deleted.
On WindowsAndroid
- To delete the device information from the AirID Central App, first select the function "Forget AirID" in the AirID Central
- Then open the Android Open the Bluetooth settings on Windows the device ( Settings - Devices - → Bluetooth)
- Select the corresponding AirID using the displayed serial number and click tap the blue Info button
- Tap on "Remove Device"Click "Yes" to confirm the removal of the device.Cancel pairing" to delete the pairing information
On AirID
Delete All Pairing Information
To delete all stored pairing information from AirID a "Reset Keys" (verlinkung) " can be performed in the Settings menu.
Delete Specific Pairing Information
Specific pairing information can be deleted via AirID Central App. To do this, go to the paired devices view, select the corresponding device from the list and click Delete.
On AirID Version 2, the pairing information with a specific device can also be deleted by selectingTo delete specific pairing information from AirID a "Reset Keys" of the Windows workstation can be performed in the Settings menu.
The pairing information can also be deleted via AirID Central App. To do this, go to the paired devices view, select the corresponding device from the list and click Delete.
AirID Central App
AirID Central provides information and setting options for your AirID once your AirID is connected to your Windows device. If there is no connection, "No device" is displayed in the AirID Central.
( muss erneuert werden)
AirID Central as an AirID management software, provides an overview of:
- Serial Number - Displays the Serial Number of the connected AirID
- Card Status - Displays the status of the inserted smart card. This can be readable , unreadable or no card inserted
- Coverage Feature - Displays if the coverage feature is activated or not
- Encryption - Displays if the AES encryption is set to 128 or 256-bit
- Refresh - Checks if there is an older firmware and offers a firmware update if necessary.
- AirID Change - Displays the list of the connected AirID readers from which you can select one.
- Battery Status - Displays the battery charge in percent. The green flash symbol indicates an active charging process.
In the AirID Central, the following settings can also be made on the AirID:
- Signal Strenght - Select the signal strength of the AirID:
- low (~3-5m)
middle (~5-7 m)
high (~7,5-10 m)
- Backlight - Select if a display backlight is required
- Buzzer - Select if an acustic feedback is required
- Display - Select if the display should always be on or only for a certain time.
- Advertising - Select if the Bluetooth signal for the connection to a device should always be on or only for a certain time.An individual work schedule to save energy can also be created with AirID Central. The advertising mode remains deactivated after the defined working hours.
Note |
---|
If during the active advertising mode (EcoMode) no connection to a device is established, the advertising mode switches off automatically to save battery power. Therefore, a manual reconnection is necessary afterwards. |
The following information is displayed when clicking on the AirID device displayed in the AirID Central App:
- Serial Number
- MAC Address
- Hardware - Board Version of the AirID
- Bootloader Version
- Firmware Version
- Card OS of the inserted smart card
- Build version of the firmware
- Connected devices - shows a list of devices for which AirID stores connection information. The connection information can be deleted by deleting the device from the list.
A right click on the AirID Central icon in the Windows notification area opens a menu with the following application functions:
Screenshot
- Reestablish - opens the AirID Central App window in the foreground.
- Settings -
- System Log - displays a log of the system log entries that you can use to track activities and processes.
- Bridge - Displays the ONEKEY Bridge and the settings you can do.
- Change PIN - PIN change function for the inserted smart card
- About - Shows the AirID Central version and the developer information
- Close - Closes the AirID Central App
iOS
Under iOS system-wide support of smart cards and card readers is not possible. Therefore, the AirID driver needs to be integrated into an app to use AirID with this specific app. These apps usually interact with the available AirID Central App via extension or keychain.
Note |
---|
The AirID Central App is available in the App Store. |
The connection to the the iOS device is only active when the app in foreground is open. As soon as the app goes into the background, the Bluetooth connection to the AirID is released again.
Pairing
- Go to the App Store on your iOS device and search for AirID Central
- Install the AirID Central App on your iOS device
- Insert your smart card to power on the AirID reader
- Activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display:
- Make sure that Bluetooth is activated on your iOS device (Settings > Bluetooth > On)
- Open the AirID Central App
- Select the AirID (serial number) in the shown device list
- Compare the 6 digit pairing code shown on AirID display and confirm it to connect
- After a successful pairing, the AirID shows:
Note |
---|
If you already paired AirID with another device, please navigate to "Prefer Device" in the AirID menu press the jog-dial and choose "New". Then press the jog-dial again to confirm. |
How to Get Support
If you have a problem with the AirID (e.g. AirID is not recognized by software) and want to get support under [email protected] you shall include following information:
AirID Information
- AirID serialnumber, AirID firmware version, AirID board version. These information are available under AirID Info
Platform information
- Operating system name, edition, version and build number (e.g. Windows 10 Enterprise, Version 1803, Build 17134.228)
Tip |
---|
Hit Windows+I to open Settings. In the Settings window, navigate to System > About and scroll down. You'll see the "Edition", "Version" and "Build" numbers here. |
Log
The log file. By default it is located under:
C:\Program Files\certgate GmbH\.log
Configure Logging
cooming soon→ "Device Name" from the setting menu.
Technical Specification
Item | AirID2 | AirID 1 |
---|---|---|
First Release | September 2018 | November 2014 |
Certification | RoHS, CE, FCC | RoHS, CE |
Enclosure | ||
Shape | rectangular plus Bumper | rectangular |
Dimension | 90 x 60 x 9 mm (plus Bumper) | 90 x 60 x 9 mm |
Bumper | utilizable | n/a |
Weight in g | 48 | 48 |
Orientation of hanger | 4 (with bumper) | 1 |
Human interface | ||
Display type | LCD, 132x32 | LCD, 132x32 |
Display size | ca. 9 x 30 mm | ca. 9 x 30 mm |
Control element | Jog Dial (up/down/enter) | Jog Dial (up/down/enter) |
USB port | USB-2.0-Micro-B | USB-2.0-Micro-B |
LED visible | 2 LEDs red: on while charging blue: on while smart card powered on | 3 LEDs red battery low, please charge AirID |
Acoustic feedback | Buzzer | Buzzer |
Bluetooth | ||
Bluetooth Version | 4.2 | 4.0 LE (Low Energy) |
Battery | ||
Battery type | Built-in rechargeable lithium-polymer battery | Built-in rechargeable lithium-polymer battery |
Battery size and weight | 4.5 x 24.0 x 41.5 mm, 8g | 4.5 x 24.0 x 41.5 mm, 8g |
Capacity | 340mAh | 325 mAh |
Battery charging | via USB | via USB |
Smart card interface | ||
smart card size | ID1, contact interface (ISO7816) | ID1, contact interface (ISO7816) |
smart card type | 3V | 5V, 3V, 1,8V |
Smart chip protocol | T=0, T=1 | T=0, T=1 |
Smart chip header number | 2 | 1 |
Smart chip header type | 8 pins (MCD-7A6SC01-R), 6 pins (2286237-1,TE Connectivity) ;5 pins connected | 8 pins (MCD-7A6SC01-R), 6 pins (2286237-1,TE Connectivity) ;5 pins connected |
Using chip-backsided printed cards | X | X |
Using chip-sided printed cards | X | _ |
NFC function of card usable | X | X |
Update | ||
Firmware update | via USB | via USB |
Safety Instructions
- Protect the device from dirt, dust, moisture, chemicals and extreme temperatures and use it only in dry rooms.
- Use only original, approved accessories intended for this purpose for the device.
- Do not use the product in the immediate vicinity of heating, other heat sources or in direct sunlight.
The device is approved for an operating temperature range of -10 °C to +60 °C.
The approved temperature range during charging is between 0 °C and +45 °C.
- Do not expose the device directly to magnetic sources.
- Do not put the device in your trouser pocket.
- Do not drop the product and do not expose it to violent shocks, drops, shocks or vibrations of any kind.
- Do not attempt to service or repair the product yourself or have it serviced or repaired by an unauthorized service or person.
- Do not make any unauthorized modifications to the software or hardware.
- Do not open or operate the product if damaged.
- Do not insert foreign objects into the card slot. The opening slot is intended exclusively for inserting a smart card.
- Improper use may damage the product or connected devices.
- To charge the battery, use only standardized charging cables and power sources (5V DC; min. 500mA) to avoid overcharging. This could damage the battery.
- Do not remove or damage the seal on the side of the unit.
Disposal and Recycling
The device must not be disposed of with household waste. B2B equipment must be returned to the manufacturer.
Maintenance and Care
Clean the device only with a soft, clean and dry cloth. Do not expose the device to harsh chemicals, cleaning solutions or strong cleaning agents. Do not allow liquid to penetrate the product.
Warranty/ License/ Technical Support
Please note our regulations at Terms and Conditions & Legal Documents
Please note that only customer with a valid support and maintance agreement are authorized to get free support services.