Question
How can I change the smart card in AirID Mini?
Answer
Step-by-Step
To change a inserted smartcard please follow these steps:
- To open the device, first loosen the two screws on the back of the device
- Open the device by carefully opening the black back part of the enclosure (take care, the two parts of the enclosure are connected with a wire)
- Remove the inserted card by pushing the card out of the holder with your thumb to the open side
- Insert your smart card (format ID-000) into the card holder. Note that the smart chip is pointing down the smart card and the diagonal corner of the smart card is pointing up to the right.
- Close the device by closing the back part of the case. Make sure that the battery cable is inside the enclosure while closing the device
- Position the screws in the holes of the case again and tighten the screws until you feel resistance while screwing.
Related Articles
Was this answer helpful?
Please rate & help us to improve our FAQ.