certgate is pleased to welcome you as a new user of certgate's USB Bluetooth Connector for AirID and ONEKEY ID, ONEKEY BRIDGE.
This guide explains all the basics of ONEKEY BRIDGE and gives you step-by-steps instructions to get you started using it. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.
Support / Questions
For questions and support please use the email address [email protected]
Content of Delivery
- ONEKEY BRIDGE, USB Bluetooth Connector for AirID and OKID
Hardware Features
ONEKEY BRIDGE is a USB Bluetooth connector for AirID. The purpose of the ONEKEY BRIDGE is to use AirID with devices that do not support Bluetooth low-energy by default, or have an unstable BLE connection. Additionally, if you want to use your reader on multiple devices without pairing it first to each device, the ONEKEY BRIDGE is the best choice. Once the reader is paired with the ONEKEY BRIDGE, the reader can be used with any other device in that OKBRIDGE is plugged-in. Connected directly to a USB port, it enables wireless communication - without driver installation. Supported by any CCID-enabled systems like macOS, Linux and other platforms.
- USB 2.0 Type A connector
- Bluetooth version 4.2 supported
- Stores up to 10 device pairing information
- Miniature dimensions: 48 mm x 37,5 mm x 14 mm
- Detection of OKBRIDGE as a standard CCID card reader
- Supported operating systems: Windows 7, 8, 10, macOS (min 10.12) and Linux (plug&play requires libccid 1.4.28)
Choose Your Platform
ONEKEY BRIDGE supports AirID with firmware from version 1.3.0 upwards.
Windows 10
In this section, you will find the steps to install the AirID Driver, AirID Central App and to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector.
Prerequisites
- a computer running Windows 10 operating system
Driver Download
Download the latest AirID Installer for Windows at AirID - Software, Driver & SDK
Driver Installation
Unzip and double click on the .msi file
Folow the instructions in the installation wizard
Bluetooth Pairing
Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.
Make sure, your smart card reader is ready to connect.
- AirID: Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display:
Select the smart card reader (serial number) which you want to pair with the OKBRIDGE in the shown device list. Click Connect. If the serial number of your AirID or OKID is not displayed, click Search, to start a new searching.
Insert the paring code shown on your AirID or OKID and click Pair
Now the smart card reader is apired with the ONEKEY BRIDGE and ready to use.
If you select "Lock Workstation" in the page "Custom Setup" of the AIrID Installer for Windows, the Windows (local) smart card removal policy will be set to lock your computer upon smart card removal.
Windows 7
In this section, you will find the steps to install the ONEKEY BRIDGE Windows 7 driver and to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector.
Prerequisites
- a computer running Windows 7 operating system
Driver Download
Download the latest AirID Installer for Windows at AirID - Software, Driver & SDK
Driver Installation
Unzip and double click on the .msi file
Folow the instructions in the installation wizard
On the page "Custom Setup", select "Win USB Compat" to be installed on your computer. This is the Windows 7 driver for the ONEKEY BRIDGE.
Bluetooth Pairing
Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.
Make sure, your smart card reader is ready to connect.
- AirID: Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display:
The searching for available smart card reader starts automatically. If not, click Search to list available smart card reader.
Select the smart card reader (serial number e.g. AirID 5640002105 or OKID102211) which you want to pair with the OKBRIDGE in the shown device list. Click Connect. If the serial number of your AirID or OKID is not displayed, click Search, to start a new searching.
Insert the paring code shown on your AirID or OKID and click Pair
Now the smart card reader is paired with the ONEKEY BRIDGE and ready to use.