You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

Question

How can I change the smart card in AirID Mini?

Answer


Step-by-Step

To change a inserted smartcard please follow these steps:

  1. To open the device, first loosen the two screws on the back of the device
  2. Open the device by carefully opening the black back part of the enclosure (take care, the two parts of the enclosure are connected with a wire)
  3. Remove the inserted card by pushing the card out of the holder with your thumb to the open side
  4. Insert your smart card (format ID-000) into the card holder. Note that the smart chip is pointing down the smart card and the diagonal corner of the smart card is pointing up to the right.
  5. Close the device by closing the back part of the case. Make sure that the battery cable is inside the enclosure while closing the device
  6. Position the screws in the holes of the case again and tighten the screws until you feel resistance while screwing.


Was this answer helpful?

Please rate & help us to improve our FAQ.



  • No labels