• Created by Unknown User (tbe), last modified on Oct 18, 2022

In Settings, you can configure your AirID. Use the control element to select and confirm the settings.

Setting DisplayDescription
Settings
Settings        
>
Main window
Security
Security        
>
Select this category to configure security related settings





Distance Sensor

Distance Sensor
>            Off
Distance Sensor
>             On
Distance Sensor
> Presetting    
Distance Sensor
> Near
Distance Sensor
> Mid
Distance Sensor
> Far

Distance Sensor
> Manual setting
Go around
RSSI: -xx dB
Go around
Push to confirm

Use this setting to configure the distance sensor for the autolock. An active Bluetooth connection to the host device is required to set the distance sensor.

The automatic lock depends on the host device and its operating system and must be activated separetely, if required.

You can use pressetings or set the distance manually.

Following pressetings are available:

  • Near (~ 55 dB)
  • Mid (~ 65 dB)
  • Far (~ 70 dB)
In comparasion to the available pressetings, the manual setting allows an individual fine adjustment.

If the manual setting is selected, the curent RSSI value is shown in the display. Slowly walk around in the area you want your device to remain unlocked. Press the control element at the preferred distance to confirm the coverage area and activate the Distance Sensor function.

Please note that the measured distance may vary depending on the environment/line of sight. To reduce interference and avoid unintended disconnects, we recommend for manual setting a distance of min. three meters.


Also see section: Setup: AirID Autolock Distance


Random MAC
Random MAC
>           Off
Random MAC     
>            On

Randomizes the Bluetooth Mac Address which is used for Bluetooth advertising. This is a security feature of AirID and focuses on device anonymization.


Advertising
Advertising    
>      With Name
Advertising
>      Anonymous

Choose the bluetooth advertising mode between:

  • anonymous
  • with name (security key name and serial number will be used during advertising)
FIDO User Signal
FIDO User Signal
>             On
FIDO User Signal
>            Off

Activate or deactivate the acoustic feedback of the AirID.

Prefer Device
Prefer Device   
> [None]
Prefer Device
> [New]
Prefer Device
> 'Device Name'

With this setting you can manage your AirID Bluetooth connections to your host systems:

None: If no device is selected, a BLE connection to any of the surrounding devices is possible

New: Select this option to connect AirID to a new device, if already connected devices are nearby. All other devices already paired with your AirID will be ignored.

'Device Name': If your AirID is already paired with one or more devices, you can choose the device name to select which device the AirID should preferably be connected to in the future. All other devices will be ignored.

Back
Back            
<
Select Back to return to the Setting menu.
Reset
Reset           
>

Select this category to reset either specific or all settings of your AirID.

Be careful - deleted settings, pairings or keys cannot be restored!







Factory Reset
Factory Reset   
>
Factory Reset
> Confirm:   Yes
Factory Reset
> Really?    Yes
Factory Reset
> Really?     No
Factory Reset
> Confirm:    No

This setting resets the AirID to factory settings. All saved pairing information and keys are also deleted.

To make the factory reset, you have to confirm the query twice with 'yes'.

Reset Settings
Reset Settings 
>
Reset Settings 
> Confirm:   Yes
Reset Settings 
> Confirm:    No
With this reset, only the configured settings will be reset to default values
Reset BLE
Reset BLE 
>
Reset BLE
> Confirm:   All
Reset BLE
> 'Device Name'
Reset BLE
> Confirm:    No

This setting deletes the saved pairing information and the keys. This is recommended when passing AirID to third parties. You have the option to delete all keys or only the keys for a specific device. After the removal, a new pairing is necessary to re-established a connection.

Reset LTK Keys
Reset LTK Key
>
Reset LTK Key
> Confirm:   All
Reset LTK Key
> 'Device Name'
Reset LTK Key
> Confirm:    No
This setting deletes the saved LTK keys. You have the option to delete all keys or only the keys for a specific device.
Reset FIDO
Reset FIDO
>
Reset FIDO
> Confirm:   Yes
Reset FIDO
> Confirm:    No
With this reset, all FIDO keys will be deleted
Back
Back            
<
Select Back to return to the Setting menu.
BLE Night Mode
BLE Night Mode  
>            Off
BLE Night Mode
>             On
Choose whether or not to enable Bluetooth LE night mode. The night mode deactivate Bluetooth advertising during the night to save power.
USB Mode
USB Mode
>           CARD
USB Mode
>           FIDO
USB Mode
>    Charge only

Select the default mode for your AirID when connected to the PC via USB:

CARD: AirID automatically connects as USB Card Reader when it gets connected to the PC via USB. Also the battery will be charged. The FIDO functionality is still available via Bluetooth and can be used in parallel

FIDO: In this USB mode, FIDO authentication is available via Bluetooth and USB when the AirID is connected to a PC via USB. Also the battery will be charged. The card reader functionality is still available via Bluetooth and can be used in parallel.

Charge only: With this setting, only the battery will be charged.

Update Firmware

Update Firmware 
>
Update Firmware 
> Confirm:   Yes
Send update or 
unpower to exit
Update Firmware 
> Confirm:    No

Use this setting to update the AirID FIDO firmware manually. An USB connection to your Windows PC or Mac is required.

For detailed information see section: Firmware Update

We highly recommend you to activate the auto update service so that your AirID is always running the latest firmware. This enables you to benefit from the latest features and security-relevant updates.

Back
Back            
<
Select Back to return to the main menu.


  • No labels