Versions Compared

Old Version 1

changes.mady.by.user Unknown User (dkissel)

Saved on

compared with

New Version 2

changes.mady.by.user Unknown User (tbe)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

certgate is pleased to welcome you as a new user of certgate's USB Bluetooth Connector for AirID and ONEKEY ID (in preparation), ONEKEY AirID Mini, the AirID BRIDGE.

This guide explains all the basics of ONEKEY AirID BRIDGE and gives you step-by-steps instructions to get you started using it. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.

Support / Questions

For questions and support please use the email address [email protected]


Content of Delivery

  • ONEKEY BRIDGE, USB Bluetooth Connector for AirID and OKIDAirID BRIDGE


Hardware Features

ONEKEY AirID BRIDGE is a USB Bluetooth connector for the wireless smart card reader AirID and AirID Mini. The purpose of the ONEKEY AirID BRIDGE is to use AirID with devices that do not support Bluetooth low-energy by default, or have an unstable BLE connection. Additionally, if you want to use your reader on multiple devices without pairing it first to each device, the ONEKEY AirID BRIDGE is the best choice. Once the reader is paired with the ONEKEY AirID BRIDGE, the reader can be used with any other device in that OKBRIDGE BRIDGE is plugged-in. Connected directly to a USB port, it enables wireless communication - without driver installation. Supported by any CCID-enabled systems like macOS, Linux and other platforms.


  • USB 2.0 Type A connector
  • Bluetooth version 4.2 supported
  • Stores up to 10 device pairing information
  • Miniature dimensions: 48 mm x 37,5 mm x 14 mm
  • Detection of OKBRIDGE the BRIDGE as a standard CCID card reader
  • Supported operating systems: Windows 7, 8, 10, macOS (min 10.12) and Linux (plug&play requires libccid 1.4.28)


Choose Your Platform

Section


Column
width30%


Column
width30%


Column
width30%



Column
width30%




Note
titleNote for AirID1

AirID ONEKEY BRIDGE supports AirID AirID1 with firmware from version 1.2.1 upwards. There are no limitations for AirID2 and AirID Mini.


Windows 10
Anchor
Windows10
Windows10


In this section, you will find the steps to install the AirID Central App and to connect your AirID or

ONEKEY ID

AirID Mini reader with the

ONEKEY

AirID BRIDGE USB Bluetooth connector.

Prerequisites

  • a computer running Windows 10 operating system

UI Steps


UI Step

Installer Download

Download the latest AirID Installer for Windows at AirID - Software, Driver & SDK


UI Step

App Installation

Unzip and double click on the .exe file

Follow the instructions in the installation wizard

On the page "Custom Setup", select only "AirID Central" to be installed on your computer.


UI Step

Bluetooth Pairing

Locate a free USB port on your computer and insert the

USB Bluetooth connector, OKBRIDGE

AirID BRIDGE.

Make sure, your smart card reader is ready to connect.

  • AirID: Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display: Image Modified
  • OKID: Power on ONEKEY ID and press "OK" button for pairing mode. The OKID should display "Switch on the Bluetooth on your device and make pairing"

    • Move the mouse to the AirID Central App icon in the notification area. (or The AirID Tray icon is displayed on the bottom right side of your taskbar) Then click the mouse right button and choose Bridge

    The searching for available smart card reader starts automatically. If not, click Search to list available smart card reader.

    Select the smart card reader (serial number

    e.g. AirID 5640002105 or OKID102211

    ) which you want to pair with the

    OKBRIDGE

    BRIDGE in the shown device list. Click Connect. If the serial number of your

    AirID or OKID

    smart card reader is not displayed, click Search, to start a new searching.

    Insert the pairing code shown on your AirID or

    OKID

    AirID Mini and click Pair

    Now the smart card reader is paired with the

    ONEKEY

    AirID BRIDGE and ready

    to use. TipIf you select "Lock Workstation" in the page "Custom Setup" of the AIrID Installer for Windows, the Windows (local) smart card removal policy will be set

    to

    lock your computer upon smart card removal. NoteTo

    use

    ONEKEY ID you must additionally install the ONEKEY ID driver. After successful Bluetooth pairing ONEKEY ID will do an additional pairing with an 8 digit code

    .

    Please find more information about OKID in our ONEKEY ID - Quick Start.




    Windows 7
    Anchor
    Windows7
    Windows7


    In this section, you will find the steps to install the AirID Central App and the

    ONEKEY

    AirID BRIDGE Windows 7 driver and to connect your AirID or

    ONEKEY ID

    AirID Mini reader with the

    ONEKEY

    AirID BRIDGE USB Bluetooth connector.

    Prerequisites

    • a computer running Windows 7 operating system

    UI Steps


    UI Step

    Installer Download

    Download the latest AirID Installer for Windows at AirID - Software, Driver & SDK


    UI Step

    Driver and App Installation

    Unzip and double click on the .exe file

    Follow the instructions in the installation wizard

    On the page "Custom Setup", select "AirID Central" and "Win USB Compat" to be installed on your computer. This is the Windows 7 driver and the Central App for the

    ONEKEY

    AirID BRIDGE.


    UI Step

    Bluetooth Pairing

    Locate a free USB port on your computer and insert the

    USB Bluetooth connector, OKBRIDGE

    AirID BRIDGE.

    Make sure, your smart card reader is ready to connect.

    • AirID: Insert your smart card to power on the AirID reader and activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial control element. The AirID should display: Image Modified
  • OKID: Power on ONEKEY ID and press "OK" button for pairing mode. The OKID should display "Switch on the Bluetooth on your device and make pairing"

    • Move the mouse to the AirID Central app icon in the notification area. Then click the mouse right button and choose Bridge

    The searching for available smart card reader starts automatically. If not, click Search to list available smart card reader.

    Select the smart card reader (serial number

    e.g. AirID 5640002105 or OKID102211

    ) which you want to pair with the

    OKBRIDGE

    BRIDGE in the shown device list. Click Connect. If the serial number of your

    AirID or OKID

    smart card reader is not displayed, click Search, to start a new searching.

    Insert the pairing code shown on your AirID or

    OKID

    AirID Mini and click Pair

    Now the smart card reader is paired with the

    ONEKEY

    AirID BRIDGE and ready

    to use. TipIf you select "Lock Workstation" in the page "Custom Setup" of the AirID Installer for Windows, the Windows (local) smart card removal policy will be set

    to

    lock your computer upon smart card removal. NoteTo

    use

    ONEKEY ID you must additionally install the ONEKEY ID driver. After successful Bluetooth pairing ONEKEY ID will do an additional pairing with an 8 digit code. Please find more information about OKID in our ONEKEY ID - Quick Start

    .