Versions Compared

Old Version 1

changes.mady.by.user Unknown User (dkissel)

Saved on

compared with

New Version Current

changes.mady.by.user Serg Black

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.


UI Text Box
sizemedium

Welcome to AirID BRIDGE First Steps. Our Quick Start Guide is the perfect place to start and get an overview of the most important features of the AirID BRIDGE. You will learn how to setup, pair with your smart card reader and connect.

If you would like to know more about AirID BRIDGE and its capabilities, continue reading our FAQ and HowTos. If further questions arise, please contact us at [email protected]


We are certgate is pleased to welcome you as a new user of certgate's the USB Bluetooth Connector for AirID and ONEKEY ID (in preparation), ONEKEY AirID Mini, the AirID BRIDGE.

This guide explains all the basics of ONEKEY AirID BRIDGE and gives you step-by-steps instructions to get you started using it. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.

Support / QuestionsFor questions and support please use the email address [email protected]

Include Page
_AirID - Questions & Support
_AirID - Questions & Support


Content of Delivery

  • ONEKEY BRIDGE, USB Bluetooth Connector for AirID and OKIDAirID BRIDGE


Hardware Features

Include Page
_AB - Device Short Description
_AB - Device Short Description
ONEKEY BRIDGE is a USB Bluetooth connector for AirID. The purpose of the ONEKEY BRIDGE is to use AirID with devices that do not support Bluetooth low-energy by default, or have an unstable BLE connection. Additionally, if you want to use your reader on multiple devices without pairing it first to each device, the ONEKEY BRIDGE is the best choice. Once the reader is paired with the ONEKEY BRIDGE, the reader can be used with any other device in that OKBRIDGE is plugged-in. Connected directly to a USB port, it enables wireless communication - without driver installation. Supported by any CCID-enabled systems like macOS, Linux and other platforms.

  • USB 2.0 Type A connector
  • Bluetooth version 4.2 supported
  • Stores up to 10 device pairing information
  • Miniature dimensions: 48 mm x 37,5 mm x 14 mm
  • Detection of
OKBRIDGE
  • the BRIDGE as a standard CCID card reader
  • Supported operating systems: Windows 7, 8, 10, macOS (min 10.12) and Linux (plug&play requires libccid 1.4.28)


Image Modified

Choose Your Platform

Section


Column
width30%


column
Column
width30%



width
Note
title
30%
Column
width30%
Note
Note for AirID1

AirID BRIDGE supports AirID1 ONEKEY BRIDGE supports AirID with firmware from version 1.2.1 upwards. There are no limitations for AirID 2 and AirID Mini.


Windows 10
Anchor
Windows10
Windows10

In this section, you will find the steps to install the AirID Central App and to connect your AirID or

ONEKEY ID

AirID Mini reader with the

ONEKEY

AirID BRIDGE

USB Bluetooth connector

.

Prerequisites

  • a computer running Windows 10 operating system

UI Steps


UI Step

Installer Download

Download the latest

AirID Installer

Windows installer - a zipped .exe file - for Windows at

AirID - Software, Driver & SDK

Download Center.


UI Step

App Installation

Unzip and double click on the .exe installer file.

Follow the instructions in the installation wizard

On the page "Custom Setup", select only "AirID Central" to be installed on your computer

to install the AirID Windows driver and the AirID Central App.


UI Step

Bluetooth Pairing

  • Locate a free USB port on your computer and insert the
USB Bluetooth connector, OKBRIDGE
  • AirID BRIDGE.
  • Make sure, your smart card reader is ready to connect
.AirID
  • :
Insert
  • Power on your smart card
to power on the AirID
  • reader and
activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial
  • make sure, that Bluetooth is activated at your reader by pressing the AirID control element.
The
  • AirID should display:
Image Removed
  • OKID: Power on ONEKEY ID and press "OK" button for pairing mode. The OKID should display "Switch on the Bluetooth on your device and make pairing"
    •  Image Added
    • Move the mouse to the AirID Central App icon in the notification area
    .
    • (or The AirID Tray icon is displayed on the bottom right side of your taskbar). Then click the mouse right button and choose Bridge
    • The searching for available smart card reader starts automatically. If not, click Search to list available smart card
    reader
    • readers.
    • Select the smart card reader (serial number
    e.g. AirID 5640002105 or OKID102211) which
    • ) from the list you want to pair with
    the OKBRIDGE in the shown device list
    • . Click Connect. If the serial number of your
    AirID or OKID
    • smart card reader is not displayed, click Search, to start a new searching.
    • Insert the pairing code shown on
    your AirID or OKID
    • yoursmart card reader and click Pair

    Now the smart card reader is paired with the

    ONEKEY

    AirID BRIDGE and ready to use.

    tip

    If you select "Lock Workstation" in the page "Custom Setup" of the AIrID Installer for Windows, the



    Windows

    (local) smart card removal policy will be set to lock your computer upon smart card removal.
    Note

    To use ONEKEY ID you must additionally install the ONEKEY ID driver. After successful Bluetooth pairing ONEKEY ID will do an additional pairing with an 8 digit code. Please find more information about OKID in our ONEKEY ID - Quick Start.

    Windows

    7
    Anchor
    Windows7
    Windows7

    In this section, you will find the steps to install the AirID Central App and the

    ONEKEY

    AirID BRIDGE Windows 7 driver and to connect your AirID or

    ONEKEY ID

    AirID Mini reader with the

    ONEKEY

    AirID BRIDGE USB Bluetooth connector.

    Prerequisites

    • a computer running Windows 7 operating system

    UI Steps


    UI Step

    Installer Download

    Download the latest

    AirID Installer

    Windows installer - a zipped .exe file - for Windows at

    AirID - Software, Driver & SDK

    Download Center.


    UI Step

    Driver and App Installation

    Unzip and double click on the .exe file

    Follow the instructions in the installation wizard

    On the page "Custom Setup", select "

    to install the AirID Central

    "

    App and

    "

    the Win USB Compat

    " to be installed on your computer. This is the Windows 7 driver and the Central App for the ONEKEY BRIDGE

    . The software Win USB Compat is required so that AirID Bridge can be used with Windows 7.


    UI Step

    Bluetooth Pairing

    • Locate a free USB port on your computer and insert the
    USB Bluetooth connector, OKBRIDGE
    • AirID BRIDGE.
    • Make sure, your smart card reader is ready to connect
    .AirID
    • :
    Insert
    • Power on your smart card
    to power on the AirID
    • reader and
    activate Bluetooth at the AirID reader by navigating to the connection menu and pressing the jog dial
    • make sure, that Bluetooth is activated at your reader by pressing the AirID control element.
    The
    • AirID should display:
    Image RemovedOKID: Power on ONEKEY ID and press "OK" button for pairing mode. The OKID should display "Switch on the Bluetooth on your device and make pairing"
    • Image Added
    • Move the mouse to the AirID Central
    app
    • App icon in the notification area (or The AirID Tray icon is displayed on the bottom right side of your taskbar). Then click the mouse right button and choose Bridge
    • The searching for available smart card reader starts automatically. If not, click Search to list available smart card
    reader
    • readers.
    • Select the smart card reader (serial number
    e.g. AirID 5640002105 or OKID102211) which
    • ) from the list you want to pair with
    the OKBRIDGE in the shown device list
    • . Click Connect. If the serial number of your
    AirID or OKID
    • smart card reader is not displayed, click Search, to start a new searching.
    • Insert the pairing code shown on
    your AirID or OKID
    • yoursmart card reader and click Pair

    Now the smart card reader is paired with the

    ONEKEY

    AirID BRIDGE and ready

    to use. TipIf you select "Lock Workstation" in the page "Custom Setup" of the AirID Installer for Windows, the Windows (local) smart card removal policy will be set

    to

    lock your computer upon smart card removal. NoteTo

    use

    ONEKEY ID you must additionally install the ONEKEY ID driver. After successful Bluetooth pairing ONEKEY ID will do an additional pairing with an 8 digit code. Please find more information about OKID in our ONEKEY ID - Quick Start

    .