Versions Compared

Old Version 5

changes.mady.by.user Unknown User (csc)

Saved on

compared with

New Version Current

changes.mady.by.user Unknown User (tbe)

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.
  1. Use the control element of the AirID to navigate to Settings → Update Firmware → Confirm: Yes
  2. The AirID should display: "Send update or unpower to exit"
    With a Windows PC
  3. Connect your AirID with the USB-cable to a Windows computer or Mac.
  4. Open the folder with the extracted firmware and run the "winusb-flash-device.exe" file
  5. once the AirID restarts, the update is finished
    With a MacOS
  6. Open the folder with the firmware and run the "flash-airid.command" file
  7. After a successful update the AirID will reboot automatically and can be used as usual
  8. once the AirID restarts, the update is finished
UI Expand
titleFirmware older than 1.3.1
  1. Use the control element of the AirID to navigate to Settings → Update Firmware → Confirm: Yes
  2. The AirID should display: "Send update or unpower to exit"
    With a Windows PC
  3. Connect your AirID with the USB-cable to a Windows computer or Mac.
  4. Open the folder with the extracted firmware and run the "flash_gecko.bat" file
  5. once the AirID restarts, the update is finished
    With a MacOS
  6. Open the folder with the firmware and run the "flash-gecko.command" file
  7. After a successful update the AirID will reboot automatically and can be used as usual
  8. once the AirID restarts, the update is finished


Tip

If the update fails, the update process is intrerrupted or the AirID doesn't start anymore, go to step 1 and repeat the process.

...