- Use the control element of the AirID to navigate to Settings → Update Firmware → Confirm: Yes
- The AirID should display: "Send update or unpower to exit"
With a Windows PC - Connect your AirID with the USB-cable to a Windows computer or Mac.
- Open the folder with the extracted firmware and run the "winusb-flash-device.exe" file
- once the AirID restarts, the update is finished
With a MacOS - Open the folder with the firmware and run the "flash-airid.command" file
- After a successful update the AirID will reboot automatically and can be used as usual
- once the AirID restarts, the update is finished
If the update fails, the update process is intrerrupted or the AirID doesn't start anymore, go to step 1 and repeat the process.