The desktop software component, Bluetooth PC/SC Driver, is installed using the respective .msi packages. The requirements for installing these modules are specified in the next chapter.
Note
Use this checklist if you are performing an initialization and personalization of the ONEKEY ID on desktop:
Install the corresponding ONEKEY ID Bluetooth PC/SC driver
Use certutil.exe to personalised the smart card
Prerequesits
ONEKEY ID Bluetooth PC/SC Driver
supports the operating systems Windows 10 (32bit and 64bit)
Note
You need admin privileges to install the driver.
Certutil.exe
is a command-line program that is installed as part of Certificate Services. Certutil.exe can be used to dump and display certificates, to import certificates etc.
Driver Installation
The latest driver version of the ONEKEY ID is available on cgLabs - certgate Partner and Developer Lab.
Step 1: Driver Download | |||
---|---|---|---|
Please login or request access at [email protected] | Go to cgLabs → Onekey ID → Drivers & DSKs | Download the latest driver (zipped .msi file) for Windows | |
Step 2: Driver Installation | |||
Unzip and double click on the .msi installer file | Folow the instructions in the installation wizard | Assure that on the last page "start application" checkbox has been marked before closing the setup | |
Step 3: Bluetooth Pairing | |||
Power on cgToken and press "OK" button for pairing mode | Open Windows "Settings→ Devices→ Bluetooth". Your cgToken should be listed with its serial number. Press "Pair" | Enter 6 digit pairing key shown on ONEKEY ID display | |
After succesful pairing "Pairing sucessful" will be displayed on ONEKEY ID | |||
Step 4: Secure Pairing After successful Bluetooth pairing ONEKEY ID will do an additional pairing with an 8 digit code is required. | |||
cgToken displays session key | Wait until a session key input dialog appears on your windows's screen | Enter the code displayed on ONEKEY ID display | |
ONEKEY ID will display a success message. Setup is done |
The installation process creates a shortcut ONEKEY ID Tray (ICON) in the Programs menu under Autostart. The ONEKEY_ID_Tray icon is displayed on the bottom right side of your taskbar and displays the status of the inserted smartcard. The status can be as follows:
- No card inserted ICON
- Card inserted ICON
- Card in use ICON
General information (e.g. Version) about the ONEKEY_ID_tray can be displayed via Info. The Exit button closes the ONEKEY_ID_Tray.