certgate is pleased to welcome you as a new user of certgate's USB Bluetooth Connector for AirID and ONEKEY ID, ONEKEY BRIDGE.
This guide explains all the basics of ONEKEY BRIDGE and gives you step-by-steps instructions to get you started using it. Please take the time to read the information and follow carefully the instructions and recommendations of the installation process.
Support / Questions
For questions and support please use the email address [email protected]
Content of Delivery
- ONEKEY BRIDGE, USB Bluetooth Connector for AirID and OKID
Hardware Features
With the ONEKEY BRIDGE, certgate‘s wireless smartcard readers* can also be used with devices that do not support Bluetooth low-energy by default, such as Bluetooth devices with Windows 7 or Linux thin clients. Connected directly to a USB port, it enables wireless communication - without driver installation. For example, also for macOS and other platforms.
Windows 10
In this section, you will find the steps to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector. ONEKEY BRIDGE enables the use of AirID and ONEKEY ID on devices without BLE.
Prerequisites
- Computer running Windows 10
- AirID Central App installed
Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.
Move the mouse to the AirID Central app icon in the notification area. Then click the mouse right button and choose OKBRIDGE
Screenshot
Select the AirID (serial number) which you want to pair with the OKBRIDGE in the shown device list. Click Connect
Screenshot
If the serial number of your AirID is not displayed, click Search, to start a new searching.
Windows 7
In this section, you will find the steps to connect your AirID or ONEKEY ID reader with the ONEKEY BRIDGE USB Bluetooth connector. ONEKEY BRIDGE enables the use of AirID and ONEKEY ID on devices without BLE.
Prerequisites
- Computer running Windows 7
- AirID Central App installed
- winusbcompat.zip file or Only one Windows Setup required (t.b.d)
Locate a free USB port on your computer and insert the USB Bluetooth connector, OKBRIDGE.
Move the mouse to the AirID Central app icon in the notification area. Then click the mouse right button and choose OKBRIDGE
Screenshot
Select the AirID (serial number) which you want to pair with the OKBRIDGE in the shown device list. Click Connect
Screenshot
If the serial number of your AirID is not displayed, click Search, to start a new searching.