You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

To improve the AirID Evaluation-Kit user experience, we constantly update our demo use cases with new and easy to install software solutions. Please note that the EIDAuthenticate smart card logon solution replaces the Secure Logon 2.0 solution.

Smart Card Logon - Use Case Description

This demo use case will demonstrate a WINDOWS 2-factor Log-On authentication using a Java Card and the wireless card reader AirID.

Additionally, AirID will automatically lock the computer if a preset distance between your computer and AirID will be exceeded.

For this smart card demo use case we are using a third-party secure Log-On software, the EIDAuthenticate. This software simplifies WINDOWS smart card logon and does not require to be connected to a WINDOWS domain or to set up a Public Key Infrastructure (PKI). The smart card, provided by the AirID Evaluation-Kit, has been already initialised and personalized with a demo certificate.


1. Please check before you start:

For this use case of WINDOWS Smart Card Logon you will require:

  1. A smart card, JCOP 2.4.1 with an applet (provided with the AirID Evaluation-Kit)
  2. An AirID Version 2, wireless smart card reader (provided with the AirID Evaluation-Kit)
  3. A computer running Windows 10 operating system with Bluetooth LE 4.2 enabled (if BLE is not available onboard, a separate USB Bluetooth LE Adapter will be required). Please use a complete fresh system (clean Windows 10 installation) for this demo use case. 
  4. Administrative rights for installing new software on the computer

The computer must be stand alone or a local account must be configured on domain computers

Please use this smart card and PIN for Smart Card Logon demo use case:

  • User PIN: 123456

2. Initial Installation on Windows 10

This section describes the initial setup and basic configurations on Windows 10 which are required for the Windows based demo use case, provided that no other prior installation has taken place.

  • AirID Driver and AirID Central Installation
  • Bluetooth Pairing

Follow the steps below to install the AirID Windows Driver and the AirID Central App. The AirID Central is a management App for your AirID. The App provides you with information and settings options for your AirID when your AirID is connected to your Windows device.


Installer Download

Download the latest Windows installer - a zipped .exe file - for Windows at the Download Center.

Driver and App Installation

Unzip and double click on the .exe installer file.

Follow the instructions in the installation wizard to install the AirID Windows driver and the AirID Central App.


Bluetooth Pairing

  1. Power on your smart card reader
  2. Make sure that Bluetooth is activated at your reader by pressing the AirID control element. AirID should display: 
  3. Open Windows "Settings Devices Bluetooth" and make sure, that Bluetooth is activated.
  4. Click "Add a Bluetooth device" and your AirID should be listed with its serial number. Select the reader you want to connect with.
  5. For secure pairing, compare the displayed code on AirID with the code displayed on the host system and confirm the pairing code by pressing the jog dial on your AirID.

After successful pairing, "Your device is ready to go!" and the AirID serial number will be displayed on the Windows system and the device name of the paired device will be displayed on the AirID.


If you already paired AirID with another device, please navigate to "Prefered Device" in the AirID menu press the Jog-Dial and choose "new". Then press the Jog-Dial again to confirm. 

3. EIDAuthenticate Installation

Follow the steps below to install EIDAuthenticate:

Please download the software EIDAuthenticateSetup EIDAuthenticateCertgateEnterpriseEditionx64.msi for a 64-bit system or EIDAuthenticateCertgateEnterpriseEditionx86.msi for a 32-bit system and double click on the .msi file to install.

Follow the instructions in the installation wizard and enter your Windows user account password (not the PIN of the smart card) in the corresponding dialog box.


Now, EIDAuthenticate has been installed and from now on you will be able to log in using the smart card and the PIN. 


4. Using automated "Distance Auto-Lock" with AirID

The AirID reader can log you out and locks WINDOWS automatically, if a (preset) distance between your computer and your AirID has been exceeded.

The "Distance Log-Out" is managed in AirID settings using "Distance Sensor". 

Please set the "Distance Sensor" value so that the access to the device is automatically locked when the predefined distance from AirID is exceeded.

    1. Make sure, AirID is connected via BLE with your working device
    2. Take your AirID and navigate to Settings > Distance Sensor
    3. Select On
    4. Select Presetting and Mid

Optionally, you can select any other presetting value or do a manual setting.




Settings can only be changed with an active Bluetooth connection between your computer and AirID reader.

To avoid unintended disconnects, keep in mind that the minimum distance for the automated log-out is about three meters between your computer and AirID reader.


The distance value for the "Distance Sensor" feature represents a relative value. It depends on the signal strength of the AirID, on the environment and on other interferencing signals.



  • No labels