• Created by Unknown User (tbe), last modified by Unknown User (csc) on Aug 24, 2020

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 93 Next »

Here you will find current and prior versions of AirID related drivers, SDKs and firmware.

Driver & SDK

Choose your platform:

  Windows

  macOS

  iOS

  Android

  Linux

Firmware

Choose your product:

AirID 2 Business

AirID 2 Government

AirID 2 Mini Business

AirID 2 Mini Government

AirID 1 Business

AirID 1 Government

AirID Bridge

Driver & SDK

Windows 



Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7)200824

Release Notes

Main Changes

Beside the full installer containing Firmware, Driver and Central we finally provide the AirID Driver as a separate MSI installer and as a ZIP/INF based installer


General

  • added French localization to Installer
  • provide AirID Driver as a separate MSI installer
  • Provide AirID Driver as a separate ZIP/INF based installer

Driver: 1.0.1

  • Updated Driver to Version 1.0.1
  • Fixed forwarding settings to Central
  • Fixed some minor code issues

Central: 1.0.1

  • added french UI Translation 
  • updated firmware update to 1.4.0 for AirID2, AirID2 Mini Business (BUS)
  • added firmware update to 1.4.0 for AirID2, AirID2 Mini Government
  • removed legacy code and resources

In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-200824.exe

AirID-Installer-200824-fr.exe

AirID-Driver-Setup-1.0.1-x64.msi

AirID-Driver-Setup-1.0.1-x86.msi

AirIdSmartCardReader-1.0.1-x64.zip

AirIdSmartCardReader-1.0.1-x86.zip

AirID-Installer-200824.exe.sha2_256

AirID-Installer-200824-fr.exe.sha2_256

AirID-Driver-Setup-1.0.1-x64.msi.sha2_256

AirID-Driver-Setup-1.0.1-x86.msi.sha2_256

AirIdSmartCardReader-1.0.1-x64.zip.sha2_256

AirIdSmartCardReader-1.0.1-x86.zip.sha2_256

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7)200811

Release Notes

Main Changes

Beside the full installer containing Firmware, Driver and Central we finally provide the AirID Driver as a separate MSI installer and as a ZIP/INF based installer


General

  • added French localization to Installer
  • provide AirID Driver as a separate MSI installer
  • Provide AirID Driver as a separate ZIP/INF based installer

Driver: 1.0.0

  • Updated Driver to Version 1.0.0
  • Fixed forwarding settings to Central
  • Fixed some minor code issues

Central: 1.0.0.4

  • added french UI Translation 
  • updated firmware update to 1.4.0 for AirID2, AirID2 Mini Business (BUS)
  • added firmware update to 1.4.0 for AirID2, AirID2 Mini Government
  • removed legacy code and resources

In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

Attention

 The current distribution of the file caused some problems therefore we're currently working on a solution.


AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7)200415

Release Notes

General

  • signed with new certificate valid until 2022
  • removed OpenSC from installer

Driver: 0.9.11.6

  • signed with new certificate valid until 2022

Central: 1.0.0.2

  • added Tutorial for easy setup
  • updated firmware update to 1.3.1 for AirID2, AirID2 Mini business
  • added firmware update to 1.3.1 for AirID2, AirID2 Mini government
  • removed legacy code and resources
  • signed with new certificate valid until 2022

In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-200415.exe


AirID-Installer-200415.exe.sha2_256

AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC1.0.24.6

Installer contains:

Driver: 0.9.11.5

  • Fixed driver crashes

Central: 0.9.24

  • Fixed bug related to flash A2

includes FW updates:

  • AirID1 Business 1.2.4-GA
  • AirID1 Government 1.3.4-GA
  • AirID2 Business 1.2.1-GA
  • AirID2 Mini Business 1.2.1-GA

OpenSC v 0.20.0.6

In case the Firmware update does not proceed, unplug and plug in the USB cable. Furthermore, it is recommended to use the shipped USB cable.

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-191122.exe

AirID-Installer-191122.exe.sha2_256

AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC1.0.23.2

Installer contains:

  • AirID Driver 0.9.10

  • AirID Central v 0.9.23

    improved:

    • Removed "Backlight" setting for AirID 2 Mini
    • Removed "Settings" and "Change PIN" from AirID Central menu (right click in Windows notification area)
    includes FW updates:
    • AirID1 Business 1.2.4-GA
    • AirID1 Government 1.3.4-GA
    • AirID2 Business 1.1.1-GA
    • AirID2 Mini Business 1.1.1-GA
  • OpenSC v 0.20.0.6

Known issues:

  • Switching off and on BLE in the Windows settings might cause connection and driver issues

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-190917.exe

AirID-Installer-190917.exe.sha2_256
AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC1.0.22
  • UI design 

Installer contains:

  • AirID Driver 0.9.10

  • AirID Central v 0.9.22

    new:

    • support AirID 2 Mini (identifier, graphic, settings, etc.)
      • added graphic for AirID 2
      • added graphic for AirID 1 with certgate Layout
      • show currelty used encryption standard (AES 256 / 128) instead of showing configured encryption standard (Force 256 bit > Yes / No)

    improved:

    • improved filter and sort AirID Bridge search results
      • removed built information for FW

    fixed:

    • signal strength setting with 4 bars for AirID 2 and AirID 2 Mini

    includes FW updates:

    • AirID 1 Business 1.2.4-GA
    • AirID 1 Government 1.3.4-GA
    • AirID 2 Business 1.0.3-GA

Known limitations:

  • The Windows device manager currently shows v0.9.0.0 instead of v0.9.10.
  • Switching off and on BLE in the Windows settings might cause connection and driver issues

Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-190607.zip

AirID-Installer-190607.zip.sha2_256
AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC1.0.21

Contains:

  • Central 0.9.21
  • Driver 0.9.9
  • FW AID2-FW-1.0.3-GA

Fixed:

  • Scaling issue in Central
  • Issue with device descriptor regarding long FW names
  • Request during installation with Win 7

Improved:

  • Firmware distribution in Central for AirID1 BUS/GOV and AirID2 BUS
Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-1.0.21.zip

AirID-Installer-1.0.21.zip.sha2_256

AirID Installer for WindowsAirID Central and Driver installation for Windows, Winusbcompat (Bridge Win7), and Middleware OpenSC1.0.20.0
  • changed default: OpenSC will not be installed
  • changed default: Winusbcompat will be installed on Win7
  • removed: Auto-Lock Feature
  • updated: central 0.9.19 -> 0.9.20
    • fixed: bug related to scaling
Windows 7, 8.1, 10 (32 & 64 bit)

AirID-Installer-1.0.20.0.exe.zip

AirID-Installer-1.0.20.0.exe.zip.sha2_256


macOS

APPLE MacOS INFORMATION PAGE AVAILABLE

Please check our Information page "AirID & Smart Card @ MacOS" to receive valuable information about MacOS & smart card integration!


Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID BLE Software for MacOSAirID BLE Software for MacOS to connect AirID & AirID Mini with MacOS systems via Bluetooth LE1.1.0-GA

release contains

  • AirID BLE IFD Handler v1.1.0-GA
    (Driver for AirID BLE connection)
  • AirIDMacCentral v1.1.0-GA
    (UI program for selecting/changing AirID)
  • Full support for released versions of macOS Mojave 10.14.6 and macOS Catalina 10.15.3
  • Removed debug log for sc status (too much) in ifd-airid-ble driver
  • Added {public} to debug logging as Catalina 10.15.3 no longer allows to enable and display private data logging
  • Removed card-idle-timer Feature from ifd-airid-ble driver as it looks like Apple is integrating such a feature directly in CTK
  • ifd-airid-ble.pkg  package is now signed with Developer ID Installer: certgate GmbH (HY99FHCP6A) certificate
  • AirIDCentral.pkg package is now signed with Developer ID Installer: certgate GmbH (HY99FHCP6A) certificate
  • AirIDCentral.pkg package is now notarized and stapled as well
  • AirIDMacCentral was renamed to AirIDCentral
    • Please remove the OLD /Applications/AirIDMacCentral Application manually  
    • The Installer installs the new named AirIDCentral Application to /Applications.
  • AirID Central now  presents a  “Introduction Tutorial” when started for the first time.
  • Main Installer package is now component based and allows selection of component packages
  • Main Installer package now checks if os-version >= 10.14 (Mojave and Catalina)
  • Main Installer package now checks if os arch type == x86_64 

Known Issues

  • Enable logging of private Date is no longer working in Catalina, e.g. ‘sudo log config --mode "private_data:on"’
    • Using the PrivateLogs workaround is no longer working starting with macOS 10.15.3-beta2 (beta1 still works)
  • macOS Mojave 10.14.6
  • macOS Catalina 10.15.3


Only macOS Catalina 10.15.4 is supported.

macOS Catalina 10.15.1, 10.15.2, 10.15.3  and Betas are not supported

AirID-BLE-Software-for-MacOS-1.1.0.pkg

AirID-BLE-Software-for-MacOS-1.1.0.pkg.sha2_256

AirID CCID-USB Software for MacOS AirID CCID-USB Software for MacOS to connect AirID & AIrID Mini with MacOS (Mojave only) via USB1.4.31

Contains:

  • libccid 1.4.31 repackaged to include only certgate AirID based USB product VID/PID 
  • Installer signed with certgate Apple Developer ID certificate
  • Installer Apple notarized 

MacOS 10.13+ to 10.14.6 (Mojave) 

This package is not required on MacOS 10.15 (Catalina). MacOS 10.15 (Catalina) includes libccid 1.4.31 already. 

ifd-airid-ccid-1.4.31.pkg

ifd-airid-ccid-1.4.31.pkg.sha2_256

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID BLE Software for MacOSAirID BLE Software for MacOS to connect AirID & AirID Mini with MacOS systems via Bluetooth LE1.0.0-GA

Initial release contains

  • AirID BLE IFD Handler v1.0.0-GA
    (Driver for AirID BLE connection)
  • AirIDMacCentral v1.0.0-GA
    (UI program for selecting/changing AirID)
MacOS Mojave 10.14.6

AirID-BLE-Software-for-MacOS-1.0.0.pkg

AirID-BLE-Software-for-MacOS-1.0.0.pkg.sha2_256


iOS


Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID SDK for iOS

AirID SDK for iOS

1.0.4-GA

New or changed:

  • Analyzed and refactored code with regards to initial pairing and LTK / SK creation to make initial LTK key agreement more robust against LTK and SK negotiation failures with AirID1 devices.
  • Moved exchangeKey to AIDDeviceStateConnected
  • Added state counter to better track state changes and having better control for state transits
  • replaced calls to exchangeKey by state reenter 
  • Use state counter for detecting init abort on problems or connectivity issues when Key agreement is in progress.
  • changed Timer Timeout for pairing (from selection to successful final initialization)  from 30.0 seconds to 50.0 seconds 
  • Changed encryption TAG length from 8 to 4 to comply with other platform drivers and make packet transmit more robust
  • Updated logging to use device name where appropriate

Fixed:

  • AirID reader becomes disconnected during initial connection with pairing (regression)
  • Fixed mis guided Timer Timeout which sometimes fires even when Timer was invalidated.  This issue was partly responsible for firing  "Initialization Timeout" Errors even when LTK and SK where successfully negotiated.
  • Use encrypted data length for packet calculation not the "unencrypted" data length.
>= iOS 10.3.3; Xcode 10+

AirID-iOS-Driver-v1.0.4-GA.zip

AirID-iOS-Driver-v1.0.4-GA.zip.sha2_256

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID SDK for iOS

AirID SDK for iOS

1.0.0

  • Added compatibility with firmware 1.2.1 and 1.3.0

  • Improved protocol downgrade protection

>= iOS 10.3.3; Xcode 10+

AirID-iOS-SDK_1.0.0.zip

AirID-iOS-SDK_1.0.0.zip.sha2_256


Android



Due to the huge amount of variants of Android OS implementations, we can not guarantee the function of AirID SDKs and AirID devices with any Android device. We are only supporting AirD2 in combination of the Enterprise Edition of Samsung Galaxy S8, S9 & S10.

In case of unstable AirID2 - Android connections please contact our support by creating a support ticket:

For more information about our products & services, please visit our website: https://airid.com/en/

For technical assistance & support, please visit https://airid.com/service-portal 

Or create a support ticket here: create a support request

 



Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID SDK for AndroidAirID SDK for Android1.9.4-GA
  • Android Studio 3.6.3 was used to build the final GA Release
  • Android 10 is now fully supported but we still targeting API version 28
  • The Driver now uses android.permission.ACCESS_FINE_LOCATION to support Android 10 in AndroidManifest.xml
  • The Driver now uses android.permission.ACCESS_BACKGROUND_LOCATION to support Android 10
  • Better support for HW revision A2XX1.1.0 and firmware 1.3.1+. 
  • Added A2XX and A2MX serial number parsing to DeviceType enum.
  • Fixed an issue with AirID1 key management and Android 10  

Android 8 upwards (API 26); Android Studio 3.6.3 

AirID-Android-Driver-v1.9.4.zip

AirID-Android-Driver-v1.9.4.zip.sha2_256

Driver & SDK

Description

Version

Release Notes

Supported OS Platform

File

Checksum (SHA256)

AirID SDK for AndroidAirID SDK for Android1.9.3-GA
  • Updated Gradle version to v3.4.1
  • Activated NSLogger for debug version
  • Implementation of accessibility for AirID2 Mini readers
  • Defined new setting for LEDs for AirID2 Mini
Android 8 upwards (API 26); Android Studio 3.4.1AirID-Android-Driver_v1.9.3-GA.zipAirID-Android-Driver_v1.9.3-GA.zip.sha2_256
AirID SDK for AndroidAirID SDK for Android1.9.2-GA
  • Analyze code with regards to initial pairing and LTK/SK creation to make initial LTK key agreement more robust against LTK and SK negotiation failures with AirID1 devices.
  • Analyze and test code with regards to time intervals to eliminate AirID reader stuck on "not bonded yet".
  • Test and change the time intervals and delays on Bluetooth connection to make the connection more stable.
  • Set the key remotely from the app for saving LTKs is available. (Optional)
Android 8 upwards (API 26); Android Studio 3.4.1

AirID-Android-Driver-v1.9.2-GA.aar.zip

AirID-Android-Driver-v1.9.2-GA.aar.zip.sha2_256

AirID SDK for AndroidAirID SDK for Android1.8.6

Bugfixes

  • handling of AirID no random number
  • disconnect after card reset
  • loop after force AES-256 mode is enabled
  • AirID2 discovery and pairing
Android 4.4 upwards

AirIdDriverAndroid-1.8.6.aar.zip

AirIdDriverAndroid-1.8.6.aar.zip.sha2_256


Linux

As there are many distributions of Linux available, please contact our support at  https://certgate.com/service-portal to get the suitable AirID driver for your Linux system.


Firmware

AirID 2 Business


How do I update the AirID device firmware on Windows 10 and MacOS?


DescriptionVersionRelease NotesClassificationFileChecksum (SHA256)

AirID 2 Firmware Business Edition



1.4.0-GA

 Fixed

  • ensure that local changed settings are sent back to the host side.
  • Don't switch to update mode @ BLE indication "0x0A System Suspend".
  • Improve USB bootloader mode (HW version < 1.1.0) selection
  • Switch off JTAG pins if JTAG is fused

 Improvements

  • Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts.
  • Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device.
  • Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods.
  • Set 2M PHY as preferred PHY (BLE5)
  • Do all BLE related settings before advertising starts
  • A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions

 New Functionality (API/SDK)

  • new RPC method 0x16 to switch to bootloader mode from host side
  • Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0)

 Removed Functionality

  • migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported!
  • Remove BLE indications to trigger update modes (0x04 and 0x0B)
  • Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore.
  • Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising
  • Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles
Recommended Update

airid-all-firmware-1.4.0.zip

airid-all-firmware-1.4.0.zip.sha2_256

Description

VersionRelease NotesClasificationFileChecksum (SHA256)

AirID 2 Firmware Business Edition

1.3.2-GA

 Fixed

  • Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes

 Added

  • Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards
  • Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations 
  • Added event logging capability for the last ~100 events to AirID2 firmware 
    • To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos:
      • Read last ble disconnect reason in debug menu
      • Information about connection parameters
      • New logging data struct for BLE stack events:
        • size ~100 last events
        • stop logging @ disconnect
        • read data from new RPC command
        • restart logging after read
    • This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver
Recommended Updateairid-all-firmware-1.3.2.zipairid-all-firmware-1.3.2.zip.sha2_256

AirID 2 Firmware Business Edition


1.3.1-GA

Improved:

  • added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS
  • added support for new bootloader signing keys

airid-all-firmware-1.3.1.zip

airid-all-firmware-1.3.1.zip.sha2_256

AirID 2 Firmware Business Edition


1.3.0-GA

Improved:

  • Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers)
  • Low battery warnings are displayed
  • contrast menu removed from settings

airid2-fw-1.3.0.zip

airid2-fw-1.3.0.zip.sha2_256


AirID 2 Firmware Business Edition



1.2.1-GA

Improved

  • NVM rework to make future firmware updates smooth
  • BLE stack updated to v 2.12.3
  • Distance sensor presettings adjusted: near -70dB, mid -75dB, far -80dB
  • If the device is in USB card reader mode, a new bluetooth connection will not make it leave the USB card reader mode
  • Card support: disabled Clock stop support which seems to cause trouble with TicTok cards
  • For AirID Mini: Linearization of battery level during charging and discharging

Note for firmware updates

The device settings will be set to default for firmware updates from versions lower than v1.1.1. Please check your device settings after doing the firmware update

Note for firmware downgrades

If you want to downgrade to 1.1.1, first do a downgrade to 1.1.0, then upgrade to 1.1.1, otherwise NVM in 1.1.1 will not work even after factory reset. If re-updating, do a factory reset.

Note for users with version 1.2.0-rc1/rc2

For firmware updates from version 1.2.0-rc1/rc2, make sure the USB cable is not connected BEFORE the update process is started. In case the device is already connected via USB, replug the cable to enter the flashing mode.


airid2-fw-1.2.1.zip

airid2-fw-1.2.1.zip.sha2_256


AirID 2 Firmware Business Edition



1.1.1-GA

Fixed

  • Battery status icon updates with changed battery level
  • Staccato like switching connection off/on doesn't bother BLE handling
  • NVM initialization logic

Improved

  • Setting maximum and minimum advertising interval to 152.5 ms
  • Setting maximum and minimum fast connection intervals to 15 ms
  • Setting maximum and minimum slow connection intervals to 195/210 ms
  • Don't send duplicated smart card status
  • Keep existing configuration paramaters at firmware update; new ones will be added with their default values
  • LCD and backlight stay on at USB connection

Known limitations:

  • The firmware update might reset the configured settings
  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2-fw-1.1.1.zip

airid2-fw-1.1.1.zip.sha2_256

AirID 2 Firmware Business Edition


1.1.0-GA

New:

  • Implementation of settings --> "Remove pairing" to remove the pairing information and keys (prior name of this option: "Reset keys")
  • Implementation of settings --> "Reset keys" to delete the stored keys (LTK) only without removing the pairing (new option)
  • Removed "Card Info" item from menu
  • Forced LE Secure Connection method for BLE pairing and communication

Improved:

  • Turn on display and backlight permantly while the device is connected to a external power supply
  • Change default value for setting of USB Card Reader (CCID) to Off
  • Returning to prior menu item after USB Card Reader pop-up dialog closes instead of moving to main menu item "AirID" per default

Fixed:

  • issues concerning TPDU error handling
  • issues concerning the icon for distance sensor in case of exceeding BLE range
  • workaround for internal BLE stack issues by device reboot

Known limitations:

  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2-fw-1.1.0.zip


airid2-fw-1.1.0.zip.sha2_256

AirID 2 Firmware Business Edition


1.0.3-GA

Fixed:

  • Issues regarding T1 cards
  • Advertising issues
  • Smaller bugfixes

Improved:

  • Battery capacity display on device

airid2-fw-1.0.3.zip

airid2-fw-1.0.3.zip.sha2_256

AirID 2 Firmware Business Edition1.0.2-GA

Fixed:

  • Smaller bugfixes

Improved:

  • Remove "Card Info" menu item
  • Set "Force 256bit" default value to yes

airid2-fw-1.0.2.zip

airid2-fw-1.0.2.zip.sha2_256

AirID 2 Firmware Business Edition

1.0.1-GAInitial General Availability (GA) Version of the AirID2 Firmware Business Edition

airid2-fw-1.0.1.zip

airid2-fw-1.0.1.zip.sha2_256


AirID 2 Government

How do I update the AirID device firmware on Windows 10 and MacOS?

DescriptionVersionRelease NotesClassificationFileChecksum (SHA256)

AirID 2 Firmware Government Edition


1.4.0-GOV-GA

 Fixed

  • ensure that local changed settings are sent back to the host side.
  • Don't switch to update mode @ BLE indication "0x0A System Suspend".
  • Improve USB bootloader mode (HW version < 1.1.0) selection
  • Switch off JTAG pins if JTAG is fused

 Improvements

  • Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts.
  • Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device.
  • Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods.
  • Set 2M PHY as preferred PHY (BLE5)
  • Do all BLE related settings before advertising starts
  • A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions

 New Functionality (API/SDK)

  • new RPC method 0x16 to switch to bootloader mode from host side
  • Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0)

 Removed Functionality

  • migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported!
  • Remove BLE indications to trigger update modes (0x04 and 0x0B)
  • Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore.
  • Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising
  • Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles
Recommended Update

airid-all-firmware-1.4.0.zip

airid-all-firmware-1.4.0.zip.sha2_256

DescriptionVersionRelease NotesClassificationFile

Checksum (SHA256)

AirID 2 Firmware Government Edition


1.3.2-GA

 Fixed

  • Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes

 Added

  • Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards
  • Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations 
  • Added event logging capability for the last ~100 events to AirID2 firmware 
    • To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos:
      • Read last ble disconnect reason in debug menu
      • Information about connection parameters
      • New logging data struct for BLE stack events:
        • size ~100 last events
        • stop logging @ disconnect
        • read data from new RPC command
        • restart logging after read
    • This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver
Recommended Update

airid-all-firmware-1.3.2.zip

airid-all-firmware-1.3.2.zip.sha2_256

AirID 2 Firmware Government Edition

1.3.1-GOV-GA

Improved:

  • added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS
  • added support for new bootloader signing keys

airid-all-firmware-1.3.1.zip

airid-all-firmware-1.3.1.zip.sha2_256

AirID 2 Firmware Government Edition

1.3.0-GOV-GA

Improved:

  • Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers)
  • Low battery warnings are displayed
  • contrast menu removed from settings

airid2-fw-1.3.0-GOV.zip

airid2-fw-1.3.0-GOV.zip.sha2_256

AirID 2 Firmware Government Edition

1.1.1-GOV-GA

fixed

  • Battery status icon updates with changed battery level
  • Staccato like switching connection off/on doesn't bother BLE handling
  • NVM initialization logic
  • LCD and backlight stay on at USB connection

improved

  • Setting maximum and minimum advertising interval to 152.5 ms
  • Setting maximum and minimum fast connection intervals to 15 ms
  • Setting maximum and minimum slow connection intervals to 195/210 ms
  • Don't send duplicated smart card status
  • Keep existing configuration paramaters at firmware update; new ones will be added with their default values

Known limitations:

  • The firmware update might reset the configured settings
  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2-fw-1.1.1-GOV.zip

airid2-fw-1.1.1-GOV.zip.sha2_256


AirID 2 Firmware Government Edition

1.1.0-GOV-GA
  • initial release of AirID 2 Government Edition

Known limitations:

  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2-fw-1.1.0-GOV.zip

airid2-fw-1.1.0-GOV.zip.sha2_256


AirID 2 Mini Business

How do I update the AirID device firmware on Windows 10 and MacOS?

DescriptionVersionRelease NotesClassificationFileChecksum (SHA256)

AirID 2 Mini Firmware Business Edition


1.4.0-GA

 Fixed

  • ensure that local changed settings are sent back to the host side.
  • Don't switch to update mode @ BLE indication "0x0A System Suspend".
  • Improve USB bootloader mode (HW version < 1.1.0) selection
  • Switch off JTAG pins if JTAG is fused

 Improvements

  • Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts.
  • Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device.
  • Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods.
  • Set 2M PHY as preferred PHY (BLE5)
  • Do all BLE related settings before advertising starts
  • A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions

 New Functionality (API/SDK)

  • new RPC method 0x16 to switch to bootloader mode from host side
  • Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0)

 Removed Functionality

  • migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported!
  • Remove BLE indications to trigger update modes (0x04 and 0x0B)
  • Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore.
  • Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising
  • Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles
Recommended Update

airid-all-firmware-1.4.0.zip

airid-all-firmware-1.4.0.zip.sha2_256

Description

VersionRelease NotesClassificationFileChecksum (SHA256)

AirID 2 Mini Firmware Business Edition

1.3.2-GA

 Fixed

  • Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes

 Added

  • Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards
  • Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations 
  • Added event logging capability for the last ~100 events to AirID2 firmware 
    • To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos:
      • Read last ble disconnect reason in debug menu
      • Information about connection parameters
      • New logging data struct for BLE stack events:
        • size ~100 last events
        • stop logging @ disconnect
        • read data from new RPC command
        • restart logging after read
    • This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver
Recommended Updateairid-all-firmware-1.3.2.zipairid-all-firmware-1.3.2.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.3.1-GA

 Improved:

  • added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS
  • added support for new bootloader signing keys

airid-all-firmware-1.3.1.zip

airid-all-firmware-1.3.1.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.3.0-GA

 Improved:

  • Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers)
  • Low battery warnings are displayed

airid2mini-fw-1.3.0.zip


airid2mini-fw-1.3.0.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.2.1-GA

Improved

  • NVM rework to make future firmware updates smooth
  • BLE stack updated to v 2.12.3
  • Distance sensor presettings adjusted: near -70dB, mid -75dB, far -80dB
  • If the device is in USB card reader mode, a new bluetooth connection will not make it leave the USB card reader mode
  • Card support: disabled Clock stop support which seems to cause trouble with TicTok cards
  • For AirID Mini: Linearization of battery level during charging and discharging

Note for firmware updates

The device settings will be set to default for firmware updates from versions lower than v1.1.1. Please check your device settings after doing the firmware update

Note for firmware downgrades

If you want to downgrade to 1.1.1, first do a downgrade to 1.1.0, then upgrade to 1.1.1, otherwise NVM in 1.1.1 will not work even after factory reset. If re-updating, do a factory reset.

Note for users with version 1.2.0-rc1/rc2

For firmware updates from version 1.2.0-rc1/rc2, make sure the USB cable is not connected BEFORE the update process is started. In case the device is already connected via USB, replug the cable to enter the flashing mode.


airid2mini-fw-1.2.1.zip


airid2mini-fw-1.2.1.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.1.1-GA

Fixed

  • Battery status icon updates with changed battery level
  • Staccato like switching connection off/on doesn't bother BLE handling
  • NVM initialization logic
  • Green LED switches off when Smartcard has bee switched off
  • Battery warning appears at 10% battery charge and below
  • Send correct Product Name USB descriptor
  • Send correct Model Number String in GATT characteristics

Improved

  • Setting maximum and minimum advertising interval to 152.5 ms
  • Setting maximum and minimum fast connection intervals to 15 ms
  • Setting maximum and minimum slow connection intervals to 195/210 ms
  • Don't send duplicated smart card status
  • Keep existing configuration paramaters at firmware update; new ones will be added with their default values

Known limitations:

  • The firmware update might reset the configured settings
  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2mini-fw-1.1.1.zip

airid2mini-fw-1.1.1.zip.sha2_256

AirID 2 Mini Firmware Business Edition

1.1.0-GA
  • initial release of AirID 2 Mini Business Edition

Known limitations:

  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2mini-fw-1.1.0.zip

airid2mini-fw-1.1.0.zip.sha2_256


AirID 2 Mini Government

How do I update the AirID device firmware on Windows 10 and MacOS?

DescriptionVersionRelease NotesClassificationFileChecksum (SHA256)

AirID 2 Mini Firmware Government Edition


1.4.0-GOV-GA

 Fixed

  • ensure that local changed settings are sent back to the host side.
  • Don't switch to update mode @ BLE indication "0x0A System Suspend".
  • Improve USB bootloader mode (HW version < 1.1.0) selection
  • Switch off JTAG pins if JTAG is fused

 Improvements

  • Disable dynamic connection interval. Otherwise we might see BLE supervision timeouts.
  • Fix BLE disconnect after pairing and no communication for 3s. Some Android devices keep the BLE connection after pairing and blocks the communication between AirID app and AirID device.
  • Update BLE stack to version 2.13.6 and replace usage of deprecated BLE API methods.
  • Set 2M PHY as preferred PHY (BLE5)
  • Do all BLE related settings before advertising starts
  • A2XX: Switch off BLE when low battery limit is reached (~3.4V). This should prevent from smartcard errors at low battery conditions

 New Functionality (API/SDK)

  • new RPC method 0x16 to switch to bootloader mode from host side
  • Prepare OTA functionality (only for A2MX and A2XX with HW version >= 1.1.0)

 Removed Functionality

  • migrate NVM parameters from old NVM implementation. Note update from FW <= 1.1.1 are no longer supported!
  • Remove BLE indications to trigger update modes (0x04 and 0x0B)
  • Remove "Force 256 Bit" setting. "Force 256 Bit" is always enabled and cannot be disabled anymore.
  • Remove no longer needed settings: Contrast, Signal Strength and Limited Advertising
  • Add connection parameters to BLE event logging and distinguish between A2XX and A2MX timer handles
Recommended Update

airid-all-firmware-1.4.0.zip

airid-all-firmware-1.4.0.zip.sha2_256

DescriptionVersionRelease NotesClassificationFileChecksum (SHA256)

AirID 2 Mini Firmware Business Edition


1.3.2-GA

 Fixed

  • Shut up USB IRQ noises with older AirID2 hardware revisions -> speed fixes

 Added

  • Disconnect after Bluetooth Pairing when there is no write to AirID service for 3s afterwards
  • Added watchdog to switch off Bluetooth when Battery gets below 3,4V (-0%) to avoid SC failures for power consuming tasks, RSA Keypair generation or other heavy duty operations 
  • Added event logging capability for the last ~100 events to AirID2 firmware 
    • To get an insight view what happens in the BLE stack @ a disconnect, we gather some debug infos:
      • Read last ble disconnect reason in debug menu
      • Information about connection parameters
      • New logging data struct for BLE stack events:
        • size ~100 last events
        • stop logging @ disconnect
        • read data from new RPC command
        • restart logging after read
    • This feature is currently only available from the DEBUG menu of the AirID2 device and not exposed to any SDK / Driver
Recommended Update

airid-all-firmware-1.3.2.zip

airid-all-firmware-1.3.2.zip.sha2_256

AirID 2 Mini Firmware Government Edition

1.3.1-GOV-GA

Improved:

  • added intelligent flasher "winusb-flash-device.exe" and "flash-airid.command" on MacOS
  • added support for new bootloader signing keys

airid-all-firmware-1.3.1.zip

airid-all-firmware-1.3.1.zip.sha2_256

AirID 2 Mini Firmware Government Edition

1.3.0-GOV-GA

Improved:

  • Support for new USB controller for AirID2 and AirID2 Mini (the same firmware works on both controllers)
  • Low battery warnings are displayed

airid2mini-fw-1.3.0-GOV.zip

airid2mini-fw-1.3.0-GOV.zip.sha2_256

AirID 2 Mini Firmware Government Edition

1.1.1-GOV-GA

fixed

  • Battery status icon updates with changed battery level
  • Staccato like switching connection off/on doesn't bother BLE handling
  • NVM initialization logic
  • Green LED switches off when Smartcard has bee switched off
  • Battery warning appears at 10% battery charge and below
  • Send correct Product Name USB descriptor
  • Send correct Model Number String in GATT characteristics

improved

  • Setting maximum and minimum advertising interval to 152.5 ms
  • Setting maximum and minimum fast connection intervals to 15 ms
  • Setting maximum and minimum slow connection intervals to 195/210 ms
  • Don't send duplicated smart card status
  • Keep existing configuration paramaters at firmware update; new ones will be added with their default values

Known limitations:

  • The firmware update might reset the configured settings
  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.



airid2mini-fw-1.1.1-GOV.zip


airid2mini-fw-1.1.1-GOV.zip.sha2_256


AirID 2 Mini Firmware Government Edition

1.1.0-GOV-GA
  • initial release of AirID 2 Mini Government Edition

Known limitations:

  • In the rare case that the BLE connection of the reader can not be switched off by the control element, please restart the reader.
  • For users working with BLE and CCID (USB Card Reader > On) with multiple devices: If there is an active BLE connection and a new connection via CCID is started, the card access via BLE is blocked. Also the other way around: If there is an active CCID connection and a new connection via BLE is started, the card access via CCID is blocked.

airid2mini-fw-1.1.0-GOV.zip

airid2mini-fw-1.1.0-GOV.zip.sha2_256


AirID 1 Business

How do I update the AirID device firmware on Windows 10 and MacOS?


DescriptionVersionRelease NotesFileChecksum (SHA256)

AirID 1 Firmware Business Edition



1.2.4

New or changed:

  • Changed connection factory default to "ON/waiting" after Settings > Factory Reset
  • No splash screen after device reboot

Fixed issues:

  • Display charging status correctly if USB Card Reader mode is disabled
  • Display correct device name after Settings >reset keys
  • AirID freezing after initial pairing / connection with Android fixed by watchdog enabling
  • Android stability improvements:
    • Stability improvements if connection interval is set too low, e.g. 7.5ms
    • No connection interval update on idle

AirID_FW_CC2540_v1.2.4.zip


AirID_FW_CC2540_v1.2.4.zip.sha2_256

DescriptionVersionRelease NotesFileChecksum (SHA256)

AirID 1 Firmware Business Edition



1.2.2
Performance related changes:
  • Adjustment of low battery limit to avoid problems due to low battery
  • Fix initial card state in USB reader mode on windows 7
  • More error checks in case of connection loss

  • Connection interval handling improvements

  • Default signal strength to maximum

    Please set signal strength to "maximum" to ensure best wireless AirID connection

AirID_FW_CC2540_v1.2.2.zip



AirID_FW_CC2540_v1.2.2.zip.sha2_256

AirID 1 Firmware Business Edition


1.2.1

Security related changes:

  • Improved protection for replay attacks
    • Improvement of encryption algorithm: using CCM instead of ECB
    • Improvement of Session Key management
  • Improved protocol downgrade protection
    • Implementation of „Force 256bit mode“ so that AirID cannot be forced down to communicate with AES 128bit encryption. Force 256bit mode is enabled per default

Performance related changes:

  • Reduction of power consumption
    • Power down the smart card on out-of-coverage
    • Have a higher connection interval when there is no BLE traffic for some time
  • Correct rates in USB CCID descriptor
  • Improved Android compatibility (discovering of our GATT service)

Usability related changes:

  • Smart card icon on AirID display blinks when the card is powered on
  • New setting menu item „USB card reader mode“ so that the USB cardreader mode can be enabled by default when USB is connected

AirID_FW_CC2540_v1.2.1.zip

AirID_FW_CC2540_v1.2.1.zip.sha2_256

AirID 1 Firmware


1.2.0
  •  Set official vendor/product id for usb;
  •  Removed highest signal strength level;
  •  Fixed not showing name of the connected device when the card is out;
  •  Fixed not clearing mobile device name on connection timeout;
  •  Write default device name "Unknown Nr." after pairing and show it if device name not set;
  •  Changed coverage adjusting text: first 10 seconds show RSSI value then 5 seconds show "Press to confirm" message and then again show RSSI value;
  •  Extended coverage with presetting values: near, mid, far;
  •  Fixed still showing coverage menu if device disconnected (now jumps to the start menu);
  •  Added "back" buttons in the coverage menu.
AirID_FW_CC2540_v1.2.0.zip


AirID_FW_CC2540_v1.2.0.zip.sha2_256


AirID 1 Government

How do I update the AirID device firmware on Windows 10 and MacOS?


DescriptionVersionRelease NotesFileChecksum (SHA256)

AirID1 Firmware Government Edition



1.3.4-GOV

New or changed:

  • Changed connection factory default to "ON/waiting" after Settings > Factory Reset
  • No splash screen after device reboot

Fixed issues:

  • Display charging status correctly if USB Card Reader mode is disabled
  • Display correct device name after Settings >reset keys
  • AirID freezing after initial pairing / connection with Android fixed by watchdog enabling
  • Android stability improvements:
    • Stability improvements if connection interval is set too low, e.g. 7.5ms
    • No connection interval update on idle

AirID_FW_CC2540_v1.3.4-GOV.zip


AirID_FW_CC2540_v1.3.4-GOV.zip.sha2_256


DescriptionVersionRelease NotesFileChecksum (SHA256)

AirID1 Firmware Government Edition



1.3.1-GOV

Performance related changes:

  • Adjustment of low battery limit to avoid problems due to low battery
  • Fix initial card state in USB reader mode on windows 7
  • More error checks in case of connection loss
  • Connection interval handling improvements

  • Default signal strength to maximum

    Please set signal strength to "maximum" to ensure best wireless AirID connection

AirID_FW_CC2540_v1.3.1-GOV.zip


AirID_FW_CC2540_v1.3.1-GOV.zip.sha2_256


AirID Bridge

How do I update the AirID BRIDGE firmware on Windows 10, Windows 7 and MacOS?


DescriptionVersionRelease NotesFileChecksum (SHA256)

AirID Bridge Firmware

1.0.2

fixed:

  • sleep related problems

onekey-bridge-1.0.2-prodkey.zip

onekey-bridge-1.0.2-prodkey.zip.sha2_256

DescriptionVersionRelease NotesFileChecksum (SHA256)
AirID Bridge Firmware1.0.1fixed:
  • CCM tag check
  • problems getting ExtProp descriptor

onekey-bridge-1.0.1-prodkey.zip

onekey-bridge-1.0.1-prodkey.zip.sha2_256

AirID Bridge Firmware

1.0.0

  • USB command GetDeviceName (0x13) returns only 1 NULL termination
  • minor bug fixes

onekey-bridge-1.0.0-prodkey.zip

onekey-bridge-1.0.0-prodkey.zip.sha2_256

  • No labels