You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 4 Next »

Question

What should I do if the AirID is no longer connected to the PC/Laptop?

Answer

Please follow the steps below to solve connection problem:

Step-by-Step
  1. Switch off Bluetooth on PC/Laptop and switch it on again



  2. Check if the AirID 2 is connected to the PC/Laptop



  3. Check if the AirID 2 is displayed in the AirID Central



  4. If the Issue persists, the Bluetooth connection between the AirID 2 and the PC/Laptop
    must be re-paired.

    a) Please first disconnect the AirID 2 from the PC/Laptop



    b) After that, please perform the unpairing on the AirID 2 as well. Please call up the following setting on the AirID 2

        (This completely removes the connection between the AirID 2 and the PC/Laptop)

        „Settings“ > „Reset“ > „Reset BLE“ > „Confirm“ (Please select and confirm the host name of the PC/Laptop here)

  5. After disconnecting, a small window appears on the desktop after about 30 seconds



    Please confirm with "Yes" and also confirm the message on the AirID 2 display at the same time. After that, the AirID 2 should be re-paired with the PC/Laptop

             


  1. If the AirID 2 has been successfully paired with the PC/Laptop, then the following window should 
    appear:

Was this answer helpful?

Please rate & help us to improve our FAQ.















  • No labels